基于Comsol的钠电磁泵电磁分析校核计算与设计优化

Electromagnetic Analysis,Check Calculation and Optimization Design of Sodium Electromagnetic Pump Based on Comsol

为提高电磁泵设计效率,解决电磁泵电磁设计和性能分析的难点,用Comsol multiphysics软件对电磁设计部分进行校核计算,将电磁模块和流体模块进行耦合计算,计算结果和钠回路性能实验结果相吻合,证明了计算结果的可靠性。并且,计算分析了影响电磁泵性能的关键参数,提出了优化方案,通过减小齿宽、增大钠流道厚度、减小泵沟内外壁厚度等措施,使得泵的长度减小、体积减小、效率增加,优化后的效率提高110%。

In order to improve the design efficiency of the electromagnetic pump and solve the difficulties in the electromagnetic design and performance analysis of the electromagnetic pump,In this paper,Comsol multiphysics software is used to check and calculate the electromagnetic design part,coupling the electromagnetic module and the fluid module,and the calculation results are consistent with the results of the sodium loop performance experiment,which proves the reliability of the calculation results.In addition,the key parameters affecting the performance of the electromagnetic pump are calculated and analyzed,and an optimization scheme is put forward.By reducing the tooth width,increasing the thickness of sodium flow channel and reducing the thickness of the inner and outer walls of the pump groove,the length of the pump is reduced,the volume is reduced,and the efficiency is increased.The efficiency after optimization is increased by 110%.