摘要
Hollow parts of high accuracy and high strength can be produced by forming methods using liquid media. Hydroforming of tubes has reached a high standard for small parts (volume some 1000 cm3) and is further developed for larger parts (volume some 10.000 cm3). Processes for hydraulic sheet metal forming are sometimes used for small parts from single sheets These pro-cesses are currently under intensive investigation, which is also true for the processing of double layered sheets Single sheets can be formed using membranes which separate the workpiece and the liquid. This results in interesting possibilities for a part and process integration in one step The forming performance of aluminum alloys can be enhanced by using a heated liquid media when forming without membranes.
Hollow parts of high accuracy and high strength can be produced by forming methods using liquid media. Hydroforming of tubes has reached a high standard for small parts (volume some 1000 cm3) and is further developed for larger parts (volume some 10.000 cm3). Processes for hydraulic sheet metal forming are sometimes used for small parts from single sheets These pro-cesses are currently under intensive investigation, which is also true for the processing of double layered sheets Single sheets can be formed using membranes which separate the workpiece and the liquid. This results in interesting possibilities for a part and process integration in one step The forming performance of aluminum alloys can be enhanced by using a heated liquid media when forming without membranes.
基金
The author gratefu1ly acknowledges Dipl.-Ing.R.Breede and Dipl.-Ing.T.Prange for the preparation ofthe results.