期刊文献+

真空自耗电弧熔炼过程电弧及熔滴热传输行为的数值模拟 被引量:3

Modeling of Electric Arc and Droplet Thermal Transfer Behavior During the VAR Process
下载PDF
导出
摘要 为了更全面了解电弧等离子体热传输行为,建立了VAR过程电弧等离子体区的有限元模型,对电弧区电磁场、流场和温度场行了交互耦合,对电弧等离子体区的热传输行为进行了数值模拟,同时深入分析和讨论了熔滴掉落不同阶段电弧区的温度分布规律。结果表明:电弧区最高温度位于阳极熔池表面的中心部位;掉落的熔滴对整个电弧区温度场产生扭曲作用,但其本身没有受到电弧过热行为的影响;由于合金成分不均所造成的难熔金属掉块和低熔点金属掉落,对熔池表面的温度分布影响较大。 A three-dimensional mathematical model was developed to simulate the thermal transfer phenomena of arc plasma occurring during the vacuum arc remelting process.The interactive coupling among electromagnetic field,fluid field and temperature field all were considered by using ANSYS software.A thorough investigation of arc region temperature distribution influenced by detaching droplet during the VAR process was conducted.The results show that the maximum temperature of arc region is located at the center of molten pool surface.The temperature distribution of arc region can be dramatically distorted by the detaching droplet,which is not affected in the arc overheat circumstance.The refractory metal block and low-melting metal detaching caused by non-uniform alloying composition have significant effects on the temperature distribution of the molten pool surface.
出处 《材料保护》 CAS CSCD 北大核心 2013年第S1期30-33,共4页 Materials Protection
关键词 真空自耗电弧熔炼 电弧等离子体 热传输 熔滴 数值模拟 vacuum arc remelting arc plasma heat transfer droplet model
  • 相关文献

参考文献13

二级参考文献35

  • 1刘军林,赵永庆,周廉.Ti-2.5Cu,Ti-3Fe,Ti-3Cr合金铸锭的偏析[J].稀有金属材料与工程,2004,33(7):731-735. 被引量:13
  • 2赵永庆,刘军林,周廉.典型β型钛合金元素Cu,Fe和Cr的偏析规律[J].稀有金属材料与工程,2005,34(4):531-538. 被引量:33
  • 3李增儒.熔钛真空白耗电弧炉与壳式炉真空系统设计中的几问题[J].稀有金属材料与工程,1984,(5).
  • 4张继玉.真空电炉[M].沈阳:东北大学出版社,2002..
  • 5WEISS I, SEMIATIN S L. Thermomechanical processing of beta titanium alloys--an overview[J]. Mater Sci Eng A, 1998, 243: 46-65.
  • 6ZENG Wei-dong, ZHOU Yi-gang, YU Han-qing. Effect of beta flecks on low-cycle fatigue properties of Ti-10V-2Fe-3Al[J]. Journal of Materials Engineering and Performance, 2000, 9(2): 222-227.
  • 7KARASEVSKAYA O P, IVASISHIN O M, SEMIATIN S L, MATVICHUK Y V. Deformation behavior of beta-titanium alloys[J]. Mater Sci Eng A, 2003, 354: 121-132.
  • 8ZENG W D, ZHOU Y G. Effect of beta flecks on mechanical properties of Ti-10V-2Al-3Fe alloy[J]. Mater Sci Eng A, 1999, 260: 10-18.
  • 9MITCHELL A. Solidification in remelting processes[J]. Mater Sci Eng A, 2005, 413/414: 10-18.
  • 10QUATRAVAUX T, RYBERON S, HANS S, JARDY A, LUSSON B, RICHY P E. Transient VAR ingot growth modelling: application to specialty steels[C]// MITCHELL A. Proceedings of the 2003 International Symposium on Liquid Metals. German: Springer Netherlands, 2004:7183-7191.

共引文献57

同被引文献27

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部