摘要
在模具表面激光强化过程中,当单位材料激光能量达到一定值时,微小的离焦量波动就会导致飞溅缺陷的产生,对模具表面强化质量有较大的影响.利用CCD同轴视觉对激光强化的过程进行实时采集并处理,提取焊道宽度信息,作为电流一定情况下飞溅产生的一个特征量.但仅仅依靠视觉图像不能够保证检测的准确性,而声信号强度与激光能量有直接的关系,通过试验验证了这种关系.探索了声信号的均方根与飞溅产生的关系.通过声信号辅助同轴视觉对焊接过程的监测,通过不同的方面对激光模具修复飞溅的检测,极大的提高了飞溅检测的准确性.
During laser strengthening mould surface,a tiny wave of defocusing amount will generate splash as laser energy reach a certain value,which has strong effect on mould surface strengthening quality. By real-time collecting and processing the picture while laser strengthening the mould surface using CCD coaxial visual,the width of weld bead was extracted as the characteristic quantity of splash under fixed current. Acoustic signal strength has direct relation with laser energy and the relationship between acoustical signal RMS and splash was also investigated.Coaxial visual supplemented by acoustical signal achieve detecting laser strengthening splash using different sensor,improving remarkably the accuracy of splash detecting.
出处
《焊接学报》
EI
CAS
CSCD
北大核心
2015年第3期9-13,1,共6页
Transactions of The China Welding Institution
基金
国家自然科学基金资助项目(51275468)
浙江省自然科学基金资助项目(Y1110262
LY12E05015)
黑龙江省自然科学基金资助项目(E201240)
宁波市自然科学基金项目(2014A610078)
浙江省零件轧制成形技术研究重点实验室开放基金资助项目(ZKL-PR-200303)
哈尔滨市优秀学科带头人基金资助项目(2012RFXXG75)
关键词
模具激光强化
离焦量
同轴视觉
声信号
mould laser strengthen
off-focus value
coaxial visual
acoustic signal
