期刊文献+

基于激光快速成型技术的金属粉末烧结工艺 被引量:8

Metal Powder of Laser Rapid Prototyping and Manufacturing Based on Sintering Technology
下载PDF
导出
摘要 文章详细介绍了金属粉末快速成型的研究现状 ,分析了金属粉末选择性激光烧结的工艺特点 ,对这些工艺的影响因素进行了讨论。在实验基础上 ,得到了合理的铁基。 s:As a key technology of rapid prototyping and manufacturing(RP&M),rapid manufacturing of metal parts is a target of RP&M.Based on the introduction of research status and technique characteristic of selective laser sintering of metal powder which is one of the most important contents of rapid prototyping technology,experiments on selective laser sintering of iron and nickel based on alloy powder are done and effects oftechnique parameters are studied systematically.In the end,adequate sinterˉing parameters of powder are derived and verified with sintering experiments.
出处 《南通工学院学报(自然科学版)》 2004年第3期29-32,共4页
基金 江苏省教育厅基金项目(03KJD460165) 南通市科技局基金项目 (Z2003)
关键词 选区激光烧结 金属零件 影响因素 selective laser sintering process metal Parts factor
  • 相关文献

参考文献7

  • 1[1]Kruth J P, Leu M C, Nakagawa T. Progress in additive manufacturing and rapid prototyping[J]. Annals of CIRP, 1998,47(2) :525- 540.
  • 2[2]Wohlers T. Rapid Prototyping & Tooling State of the Industry [C]. Second International Conference on Rapid Prototyping & Rapid Manufacturing, Beijing, China, 2002.
  • 3罗新华,花国然.快速原型制造技术的应用及进展[J].机械制造,1998,36(3):7-9. 被引量:20
  • 4[4]Agarwala M, Bourell D, Beaman J. Direct Selective Laser Sintering of Metals[J]. Rapid Prototyping Journal, 1995, 1 (1):26- 36.
  • 5杨森,钟敏霖,张庆茂,刘文今.激光快速成型金属零件的新方法[J].激光技术,2001,25(4):254-257. 被引量:42
  • 6[6]Hua Guoran, Huang Yinhui, Zhao Jianfeng,et al. Researches on the rapid manufacturing of metal parts[J]. Journal of South -East University, 2002, 18(2): 123 - 127.
  • 7张维平,刘硕,邹龙江.TiB_2-TiB/Fe金属陶瓷复合涂层原位合成及显微分析[J].大连理工大学学报,2004,44(6):798-801. 被引量:42

二级参考文献16

  • 1邓琦林,余承业.金属粉末的选择性激光烧结[J].航空工艺技术,1996(2):19-20. 被引量:9
  • 2邓琦林,余承业.金属粉末选择性激光烧结的后处理工艺分析[J].航空工艺技术,1996(1):31-33. 被引量:9
  • 3国家自然科学基金委员会工程与材料科学部.机械工程科学技术前沿[M].北京:机械工业出版社,1996.129-133.
  • 4SUN R L, MAO J F, YANG D Z. Microscopic morphology and distribution of TiC phase in laser clad Ni-Cr-B-Si-C/TiC layer on titanium alloy substrate [J]. Surface and Coatings Technol, 2002, 155(5): 203-207.
  • 5OUYANG J H, NOWOTNY S, RICHTER A, et al. Laser cladding of yttria partially stabilized ZrO2 (YPSZ) ceramic coatings on aluminum alloys [J]. Ceramics Int, 2001, 27(2): 15-24.
  • 6LI Y X, YAO J K, LIU Y. Synthesis and cladding of Al2O3 ceramic coatings on steel substrates by a laser controlled thermite reaction [J]. Surface and Coatings Technol, 2003,172(5): 57-64.
  • 7LIM L C. Microstructures of laser-clad Ni-base hardfacing alloys [J]. Surface and Coatings Technol, 1998, 106(3): 183-192.
  • 8KOOI B J, PEI Y T, DE HOSSON J Th M. The evolution of microstructure in a laser clad TiB-Ti composite coating [J]. Acta Mater, 2003, 51(2): 831-845.
  • 9GORSSE S, MIRACLE D B. Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements [J]. Acta Mater, 2003, 51(5): 2427-2442.
  • 10BAT B V R, SUBRAMANYAM J, PRASAD V V B. Preparation of Ti-TiB-TiC and Ti-TiB composites by in-situ reaction hot pressing [J]. Mater Sci and Eng, 2002, A325(2): 126-130.

共引文献101

同被引文献51

引证文献8

二级引证文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部