期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

焊缝金属中的二次相析出及对双相不锈钢焊管性能的影响(上) 被引量：11

Secondary Phase Separation of Weld Metal and Its Performance Effect to Two Phases Stainless Steel Welded Pipe (1)
下载PDF
导出
摘要 分析了双相不锈钢及焊缝和热影响区中产生的金属间化合物等二次相形态及其析出的热力学条件。指出了低合金的双相不锈钢焊缝及其热影响区中金属间化合物相的析出通常是轻微的 ,只是在高合金化的超级双相不锈钢中这个问题才特别严重。 The article analyses equal secondary phase configuration and its separation's thermodynamics conditions of metal space compound produced from two phase stainless steel and its weld as well as its heat affected zone and points out the separation of metal space compound phase among the weld and its heat affected zone of low alloy two phase stainless steel usually is lightly,only this problem among ultra two phase stainless steel of the high alloy is seriously.
作者 何德孚 曹志樑 蔡新强 周志江
机构地区 久立焊管研究所 久立不锈钢管有限公司 浙江久立集团公司
出处 《焊管》 2004年第5期27-35,75,共9页 Welded Pipe and Tube
关键词 超级双相不锈钢 析出 焊缝金属 热影响区 焊管 金属间化合物 低合金 相形态 物相 性能 two phase stainless steel welded pipe weld and its heat affected zone secondary phase compound
分类号 TE973 [石油与天然气工程—石油机械设备] TG142.71 [金属学及工艺—金属材料]
  • 相关文献

参考文献17

  • 1Nilsson J O.Structural stability of super duplex stainless weld metals and its dependence on W and Cu[J].Metallurgical and Meterials Trans.A,1996,27A:2196-2208
  • 2Karlsson L.Precipitation of inter-metallic phases in 22%Cr duplex stainless steel weld metals[J],Welding J.1995,74(1):28-40
  • 3Nilsson J O.Super duplex stainless steels[J].Materials Science and Technology,1992(9):685-700
  • 4Jinsun Liao.Nitride precipitation in weld HAZ of a duplex stainless steel[J].ISIJ inter.,2001,41(5):460-467
  • 5Komizo Y.HAZ embrittlements in high Cr-Mo duplex stainless steel and the effects of Ni and N[J].Welding inter,1991,5(4):277-282
  • 6Van Nassau.Welding duplex and super duplex stainless steels-A guide for industry[J],Welding in the World.1993,31(5):323-343
  • 7ASTM.2000 Annualy Book of ASTM Standar[S].
  • 8Daris J R.Metal Handbook[Z].ASM inter,1998
  • 9Karlsson L.Intermetallic phase precipitation in duplex stainless steel and weld metals[J],WRC Bulletin 1999,438:1-23
  • 10Karlsson L.Welding duplex and super-duplex stainless steels[J].Welding Inter,2000 14(1):5-11

二级参考文献36

  • 1何德孚,俞海良,唐新华.桑塔纳轿车中消声器总成自动焊机设计及研制[J].焊管,1996,19(2):9-13. 被引量：2
  • 2[1]Puzak P P,Apblett W R,Pellint W S. Hot cracking of stainless weldments.Welding Journal,1956,35(1):9～17
  • 3[2]Borland J C,Yonger R N. Some aspects of cracking in welded Cr-Ni austenitic steels.British welding Journal,1960(1):22～59
  • 4[3]Hull F C.Effect of delta ferrite on the hot cracking of stainless steel.Welding Journal 1967,46(9):399～409
  • 5[4]Masumoto I,Tamaki K,Kutsura M.Hot cracking of austenitic stainless steel weld metal.Trans.of JWS,1972,41(11):1306～1341
  • 6[5]Brooks J A,Lambert F J.The effects of P,S,and ferrite content on weld cracking of type 309 stainless steel.1978,57(5):139～143
  • 7[6]Lundin C D,Chou C P, Sulivan C J.Hot cracking resistance of austenitic stainless steel weldments.Welding Journal,1980,59(8):226～232
  • 8[7]Lippold J C,Savage W F.Solidification of austenitic stainless steel weldments,part3-the effect of solidification behavior on hot cracking susceptiblity.1982,61(12):388～396
  • 9[8]Lippold J C.Centerline cracking in deep penetration electron beam welds in type 304L.Welding Journal,1985,64(5):127～136
  • 10[9]David S A,Vitek J M.Correlation between solidification parameters and weld micro-structures.International Materials Reviews,1989,34(5):213～245

共引文献19

同被引文献104

引证文献11

二级引证文献42

焊管
2004年 第5期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部