期刊文献+

爆炸喷涂空心球形氧化锆热障涂层的抗热冲击性能 被引量:13

THERMAL FATIGUE BEHAVIORS OF THERMAL BARRIER COATINGS DEPOSITED BY DETONATION GUN WITH HOLLOW SPHERICAL POWDER
下载PDF
导出
摘要 在镍基高温合金基体DSM11上制备双层结构的热障涂层.粘结底层采用电弧离子镀技术制备的NiCoCrAlY涂层,陶瓷顶层采用爆炸喷涂技术制备的Y2O3部分稳定的ZrO2(YSZ)陶瓷涂层,粉末采用普通实心YSZ粉、空心球形YSZ粉.对制备的热障涂层进行热导率测定和热冲击性能实验.结果表明:爆炸喷涂制备的空心YSZ陶瓷层涂层具有低的热导率和良好的抗热冲击性能. After depositing Ni-20Co-20Cr-8Al-0.5Y(mass fraction, %) bond coat on a Ni base superalloy by arc ion plating, a ceramic top coat of normal solid ZrO2-8%Y2O3 powder (NSP-YSZ) or hollow spherical ZrO2-8%Y2O3 powder (HSP-YSZ) was deposited by detonation gun spray, respectively. The result shows that the ceramic top-coat sprayed by D-gun has a lower thermal conductivity. During the thermal cycling tests performed at 1100 degreesC, the coating of HSP exhibits good resistance to thermal shock.
出处 《金属学报》 SCIE EI CAS CSCD 北大核心 2004年第11期1179-1182,共4页 Acta Metallurgica Sinica
基金 中国科学院方向性创新资助项目KGCX2-212-02
关键词 电弧离子镀 爆炸喷涂 空心球形YSZ粉 热导率 热冲击 thermal barrier coating detonation gun spray hollow spherical ZrO2 powder thermal conductivity thermal shock cycling
  • 引文网络
  • 相关文献

参考文献7

  • 1[1]Goward G W. Surf Coat Technol, 1998; 108/109:73
  • 2[4]Talor R E. Mater Sci Eng, 1998; A245:160
  • 3[5]Sun J H, Chang E, Chao C H, Cheng M J. Oxid Met,1993; 40(5/6): 465
  • 4[6]Toraya H, Yoshimura M, Somiya S. J Am Ceram Soc,1984; 67:183
  • 5[8]Miller R A. Surf Coat Technol, 1987; 30:1
  • 6[9]An K, Ravichandran K S, Dutton R E, Semiatin S L. J Am Ceram Soc, 1998; 82:399
  • 7[10]Hsueh C H, Becher P F, Fuller E R, Langer S A, Carter W C. Mater Sci Forum, 1999; 308-311:442

同被引文献212

引证文献13

二级引证文献105

;
使用帮助 返回顶部