期刊文献+

低压浸渗Preform制备Al_2O_3/Zn合金复合材料 被引量:1

Fabricating Al_2 O_3 /Zn Alloy Composites by Low Pressure Infiltrating Preform
下载PDF
导出
摘要 利用液态浸渗技术制备了Al_2O_3/Zn合金复合材料。研究结果表明,在低压下使液态金属浸渗Preform制备金属基复合材料是可行的,浸渗压力低于10MPa;在浸渗过程中,液态金属的温度对浸渗压力有较大影响。所制备的复合材料具有均匀的显微组织,纤维与基体中的活性元素的相互作用有利于Zn合金的共晶组织生核和长大。 A1_2 O_3 /Zn alloy composites are fabricated by liquid infiltration techniques. The results show that it is feasible to fabricate metal matrix composite by infiltrating liquid metal into preform at low pressure, and the infiltrating pressure is lower than 10MPa; during the infiltration, the temperature of liquid metal has greater effect on the infiltrating pressure. The composites fabricated have uniform microstructures, and the interactions between the fibers and the active elements in the matrix are favourable for eutectic structure of Zn alloy to nucleate and to grow.
出处 《南方冶金学院学报》 1993年第4期358-364,共7页 Journal of Southern Institute of Metallurgy
关键词 复合材料 低压浸渗 金属复合材料 composite, low pressure infiltration
  • 引文网络
  • 相关文献

参考文献5

二级参考文献20

  • 1沈真.复合材料及其结构疲劳、损伤和断裂研究概况[J].复合材料学报,1990,7(2):55-63. 被引量:7
  • 2刘政,1989年
  • 3胡汉起,金属凝固,1985年
  • 4齐丕骧,挤压铸造,1984年
  • 5李庆春,铸件形成理论基础,1982年
  • 6匿名著者,凝合过程,1981年
  • 7饶东生,硅酸盐物理化学,1980年
  • 8团体著者,无机化学.下,1980年
  • 9团体著者,铸造有色合金及其熔炼,1980年
  • 10陈念贻,氧化铝生产的物理化学,1962年

共引文献84

同被引文献5

引证文献1

;
使用帮助 返回顶部