期刊文献+

铜薄膜与Al_2O_3陶瓷界面结合力的IBAD过渡层增强 被引量:4

ENHANCEMENT OF COPPER FILM ON AI_2O_3 WITH AN ION BEAM ASSISTED DEPOSITED INTERMEDIATE METAL LAYER
下载PDF
导出
摘要 利用离子束辅助淀积(IBAD)方法在Al_2O_3陶瓷基片上镀制过渡金属层,然后在此过渡层上进一步用电子束蒸发镀制铜导电薄膜。这种复合方法镀制的铜膜在具有低电阻率的同时,界面附着力有大幅度增加。在本文实验条件下,有IBAD铜或钛过渡层薄膜的附着力比没有过渡层的薄膜附着力分别增加了5倍和8倍。 Metal interface layer by ion beam assisted deposition (IBAD) between the Al_2O_3 substrate and copper surface film deposited by electron beam is made. The mechanical and electronic properties of the composite film are studied. The experimental results show that the composite film has lower resistivity than that of IBAD film and has better interface adhesion than that of the film by electron beam evaporation.
出处 《真空科学与技术》 CSCD 1993年第5期352-355,共4页 Vacuum Science and Technology
基金 国家自然科学基金 中关村分析测试基金
关键词 陶瓷基片 薄膜 IBAD 镀膜 Ion beam assisted deposition (IBAD), Ceramic substrate, Metal film
  • 引文网络
  • 相关文献

同被引文献67

  • 1范玉殿,周志烽.薄膜应力的研究[J].真空科学与技术,1993,13(2):130-137. 被引量:2
  • 2陈焘,罗崇泰.薄膜应力的研究进展[J].真空与低温,2006,12(2):68-74. 被引量:32
  • 3孙喜莲,邵建达.铬过渡层对银膜光学性质及附着力的影响[J].中国激光,2006,33(12):1680-1683. 被引量:10
  • 4冯纪伟,张文清,江莞.Ag/Al_2O_3界面结构与O_2分压关系的原子级热力学模拟[J].无机材料学报,2007,22(1):119-122. 被引量:1
  • 5林书铨 唐敦乙 等.真空镀膜技术中的离子束与离子源:91-320[M].西安:西安交通大学科技情报室,1991..
  • 6刘培俊.离子源物理与技术[M].西安:西安交通大学出版社,1980.144-149.
  • 7Allara L D. A perspective on surfaces and interfaces[J] .Nature, 2005, 437(7059): 638-639.
  • 8Renaud G. Oxide surfaces and metal/ oxide interfaces studiedby grazing incidence X-ray scattering[J]. Surface ScienceReports, 1998: 32(1): 5-90.
  • 9Zhukovskii F Y,Alfredsson M,Hermansson K, et al. Ab ini-tio simulations of silver film adhesion on α-Al2 O3 (0001)and MgO (100) surfaces [J]. Nuclear Instruments andMethods in Physics Research B,1998,141(1-4):73-78.
  • 10Bacalis C N, Kunz B A. Ab initio calculations of selected ionizationstates of Cu on MgO(001) [J]. Physical ReviewB,1985,32(8):4857-4865.

引证文献4

二级引证文献15

;
使用帮助 返回顶部