期刊文献+

酸洗机组碎边剪设计更改方案探讨 被引量:1

A Survey on the Revision of Scrap Chopper Design of Pickle Line
下载PDF
导出
摘要 冷轧厂酸洗机组在试生产5.5~6.0mm厚的钢板时,碎边剪经常发生堵转现象,影响了该规格钢板的正常生产。本文通过建立斜刀圆盘剪的剪切力学模型,对其力能参数进行计算验证,并采用机械系统动力学的理论进行定性分析,指出了发生堵转的根本原因,证明了原设计的不合理性,为设计更改方案提供了理论依据,并对其更改方案提出讨论意见。 In trial production of 5.5-6.0mm steel plate, plugging often occurred to the scrap chopper on pickle line, which affected the normal production. Soa mechanical model for the disk scrap chopper with angle knives is established tocalculate and varify the mechanical parameters. Qualitative analysis is made according to the kinetic theory of mechanical system to find the fundamental reason ofplugging. The irrationality of the original design is revealed,and the theoretical basis and proposals for the revision of scrap chopper design are posed.
作者 何汝迎
出处 《宝钢技术》 CAS 1994年第5期53-57,共5页 Baosteel Technology
  • 引文网络
  • 相关文献

同被引文献7

  • 1吴志生,袁长泽,苏宗仁.切边圆盘剪及碎边剪的设计[J].轻合金加工技术,2001,20(3):24-26. 被引量:2
  • 2赵伟,付国光,范维河,徐秀容.碎边剪箱体的加工[J].一重技术,2006(4):72-72. 被引量:1
  • 3全国齿轮标准化技术委员会.GB/T3480-1997渐开线圆柱齿轮承载能力计算方法[S].北京:中国标准出版社,1997.
  • 4方胜年.硅钢厂碎边剪设计错误的分析.武钢技术,1982,(3):75-81.
  • 5全国齿轮标准化技术委员会.GB/T10095-2001渐开线圆柱齿轮精度[S].北京:中国标准出版社,2001
  • 6齿轮手册编委会.齿轮手册(第二版)[M].北京:机械工业出版社,2001.
  • 7王兴南.碎边剪制造质量的控制方法[J].一重技术,2007(5):118-119. 被引量:1

引证文献1

二级引证文献1

;
使用帮助 返回顶部