期刊文献+

四辊铝箔轧机辊系变形的研究 被引量:4

Study on roll deformation in 4-high aluminum foil mill
原文传递
导出
摘要 本文建立了四辊铝箔轧机分割模型,考虑了工作辊温度场、铝箔轧制力不同于带材轧制之处、工作辊边部的压靠。计算结果与实测基本符合,为铝箔轧制板型控制提供理论基础。 The point matching method is used to calculate the roll deformation of four-high aluminum foil mill, work roll's heat crown, foil rolling force and roll kiss rolling being considered. The computer results accord with the experiments. The theoretical base is provided for aluminum foil mill.
出处 《冶金设备》 1994年第4期1-3,10,共4页 Metallurgical Equipment
关键词 铝箔轧机 辊系变形 分割模型 Aluminum foil mill Roll deformation Point matching method
  • 引文网络
  • 相关文献

同被引文献8

  • 1王宏旭,连家创,刘宏民.四辊冷轧机轧制过程中带材的板形和断面形状的模拟[J].冶金设备,1996(3):11-13. 被引量:4
  • 2高鼎铭.辊间压力分布.设计与制造,2006,(1):33-33.
  • 3Ginzburg V B.High-Quality Steel Rolling Theory and Practice[M].New York:Marcel Dekker,1993.
  • 4雷斯曼.弹性力学理论与应用[M].上海:华东化工大学出版社,1989.
  • 5安托尼.三角级数[M].北京;机械工业出版社,2004.
  • 6黄庆学,梁爱生.高精度轧制技术[M].北京:冶金工业出版社,2004.
  • 7连家创,段振勇.轧件宽展量的研究[J]钢铁,1984(11).
  • 8顾云舟,张杰,陈先霖,魏钢,苏毅,罗永军.高效实用的板带变形求解方法[J].北京科技大学学报,2002,24(3):333-335. 被引量:2

引证文献4

二级引证文献29

;
使用帮助 返回顶部