期刊文献+

基于ANSYS的快速铸轧过程温度场数值模拟 被引量:16

ANSYS-based finite element simulation on temperature field of high-speed roll casting process
下载PDF
导出
摘要 建立了快速铸轧过程这类具有质量输运现象的金属凝固传热有限元数学模型,考虑了影响辊套与带坯传热的界面接触热导问题,采用大型通用有限元分析软件ANSYS对快速铸轧过程中的辊套与铸坯耦合温度场进行了仿真分析,并就不同工艺参数(铸轧区长度、接触界面换热系数、浇注温度、铸坏厚度以及铸轧速度等)对铸坯温度分布及其相变区间的影响进行了系列研究,为连续铸轧特别是快速铸轧工业实验参数设计提供了依据。 Finite elemental heat transfer models for solidification process with mass transportation phenomenon as high-speed roll casting techniques are set up in this paper.The roller sleeve and the strip are taken as a whole according to the characteristic of thermal contact conductance exists between the interfaces of them.Simulation of the coupled temperature fields between the roller sleeve and the strip in high-speed roll casting process have been done with ANSYS finite element analysis software. A series researches on the variation laws of the temperature distribution and phase changing zone under different technical parameters have been done,which provide basis for the parameters design of industrial experments in continuous roll casting,especially high-speed roll casting process.
出处 《重型机械》 2005年第2期39-44,共6页 Heavy Machinery
基金 国家重大基础研究发展规划(973)项目(G1999064906)
  • 引文网络
  • 相关文献

参考文献11

二级参考文献24

  • 1刘高典.温度场的数值模拟[M].重庆:重庆大学出版社,1990..
  • 2(美)因克罗普拉F P.传热基础[M].北京:宇航出版社,1985..
  • 3Bagshaw M J.双辊铸轧的稳态模型.材料铸造讨论会[M].,1986,1..
  • 4李晓谦.连续铸轧的热传递系数的一种简便计算方法[J].中南矿冶学院学报,1992,.
  • 5宋维锡,金属学,1989年
  • 6郭宽良,计算传热学,1988年
  • 7刘慰俭,钢铁,1987年,22卷,8期,11页
  • 8周筠清,钢铁,1986年,21卷,2期,66页
  • 9蔡开科,金属学报,1983年,19卷,1期,B33页
  • 10马锡良,铝带坯连续铸轧生产,1992年

共引文献48

同被引文献104

引证文献16

二级引证文献40

;
使用帮助 返回顶部