期刊文献+

细纱牵伸器材及工艺配置对成纱细节的影响 被引量:23

Influence on Yarn Thin Place of Spinning Draft Apparatus and Technology Configuration
下载PDF
导出
摘要 简要分析了成纱细节产生的原因,就细纱上销、胶圈、胶辊与集合器等关键牵伸器材以及加压牵伸形式、粗纱捻系数与细纱后区牵伸倍数等工艺配置对成纱细节的影响进行了试验分析。结果表明,将宽面钳口尼龙上销与新型下销进行配置、采用适当的胶圈张力、较小的钳口隔距、使用集合器、加大粗纱捻系数、减小细纱后区牵伸倍数并采用适宜的胶辊表面粗糙度,对控制成纱细节有利。 Reasons on generating yam thin place were analyzed, and influence on yarn thin place of technology configuration such as key draft apparatus which are spinning top pin, apron, top roller , collector and so on, form of draft and pressure, roving twist factor and spinning back zone draft multiple et al. were tested. The result shows that it is better for controlling yarn thin place to configure wide nip nylon top pin and new type bottom pin, adopt suitable apron tension and smaller nip gauge, use collector, increase roving twist factor, reduce spinning back zone draft multiple and adopt suitable surface roughness of top roller.
出处 《棉纺织技术》 CAS CSCD 北大核心 2005年第8期8-10,共3页 Cotton Textile Technology
关键词 细纱 细节 牵伸器材 钳口隔距 牵伸倍数 捻系数 Spun Yarn, Thin Place, Draft Apparatus, Nip Gauge, Draft Multiple, Twist factor
  • 引文网络
  • 相关文献

参考文献4

二级参考文献9

共引文献72

同被引文献74

引证文献23

二级引证文献89

相关主题

;
使用帮助 返回顶部