期刊文献+

采用合理毛坯形状可以消除缩孔 被引量:1

The Elimination of Shrinkage Cavity by Adopting Proper Blank Shape
下载PDF
导出
摘要 此文应用金属塑性变形理论对冷挤压中的缩孔形成机理进行了定性分析,分别论述了工艺改进前的毛坯形状对金属流动规律的影响和工艺改进后的毛坯形状对金属流动规律的影响,找到了缩孔的形成原因和消除缩孔的解决办法。此文对解决原材料浪费问题和提高产品质量均有实用价值。 This paper qualitatively analysis the formation mechanism of shrinkage cavity in plastic shaping by adopting the theory of plastic deformation. The paper discusses the effects of blank shape on metal flow law and finds out the cafuse for forming shrinkage cavity and the method of eliminating it. The topic will be of great values for saving raw materials and improving the quality of products.
作者 宋力
出处 《金属成形工艺》 北大核心 1995年第5期13-14,共2页 Metal Forming Technology
关键词 毛坯 缩孔 冷挤压 塑性成形 Blank Shrinkage Cavity Cold Extrusion Plastic Shaping
  • 引文网络
  • 相关文献

同被引文献5

  • 1[2]CHUNG S W,KIM W J,HIGASHI K.The effect of die geometry on the double shear extrusion by parametric FVM simulation[J].Scripts Materialia,2004,51 (11):1117 -1122.
  • 2[3]LEE D J,KIM D J,KIM B M.New processes to prevent a flow defect in the combined forward-backward cold extrusion of a piston-pin[J].Journal of Materials Processing Technology,2003,139 (1-3):422-427.
  • 3[4]NARAYANASAMY R,SRINIVASAN P,VENKATESAN R.Computer aided design and manufacture of streamlined extrusion dies[J].Journal of Materials Processing Technology,2003,138(1-3):262 -264.
  • 4范建文,吴诗惇,刘马宝.杆-杆型复合挤压过程工件杆部表面裂纹缺陷的预测[J].应用力学学报,1999,16(3):53-57. 被引量:4
  • 5闫洪,夏巨谌,李志刚,董湘怀,杨国泰,何成宏.工艺参数对铝型材挤压变形规律的影响[J].中国有色金属学报,2002,12(6):1154-1161. 被引量:21

引证文献1

二级引证文献9

;
使用帮助 返回顶部