摘要
利用改进后的定向凝固装置,研究了在阶跃增速和线性增、减速的变速生长条件下,Pb-Sn共晶合金定向凝固共晶组织的变化。实验结果表明:当共晶试样缓慢线性增速或减速时,定向生长共晶片间距的调节分别通过两相共晶片的逐步分叉或合并缓慢进行;当共晶试样增速和减速的加速度值相同时,实际共晶生长速度的变化过程呈对称的逆曲线。
The structure variety of directionally solidified eutectic Pb-Sn alloy under step and linear change of specimen displacement velocity was experimentally observed.The experiments were conducted on a directional solidification apparatus with an electronic varying velocity programmer for specimen displacement,which was designed and constructed by the authors.The experimental results show that,when the eutectic specimen moves with a slow and linear increase or decrease in velocity,the average laminar spacing of the directionally grown eutectic changes through progressive branching or merging of the eutectic laminae of both the two phases.The variation curves of the eutectic growth rates are approximately symmetric for the increase and decrease in the displacement velocity at the same acceleration.
出处
《金属学报》
SCIE
EI
CAS
CSCD
北大核心
1995年第11期A494-A500,共7页
Acta Metallurgica Sinica
基金
国家教委留学回国人员基金
关键词
共晶生长
定向凝固
共晶组织
铅-锌共晶合金
eutectic growth,directional solidification,eutectic structure,Pb-Sn alloy