期刊文献+

横向卷曲切屑宽度的理论预测 被引量:1

The Theoretical Prediction for Width of Cross- Curling Chips
下载PDF
导出
摘要 通过切削试验发现,切屑宽度直接影响切屑横向卷曲半径,进而影响切屑折断性。因此,基于切削刃弦理论,推导了切屑宽度的理论计算公式,并通过试验证了其正确性,从而为切屑横向卷曲半径及切屑折断性的预测奠定了基础。 It is found that the Change of chips width will directly affect the radius of curvature of the cross- curling chips through metal cutting experiments.Furthermore,it will also affect the chips break nature.In this paper,theoretical formula of chips width based on Colwell cutting edge string are inferred through theoretical analyses of chips break nature and verify formula correctness through experiments.It builts basis for the prediction of the radius of curvature of cross-curling chips and chips break nature.
出处 《哈尔滨科学技术大学学报》 1996年第2期1-5,共5页
基金 国家自然科学基金
关键词 金属切削 切屑宽度 横向卷曲 :metal cutting width of chips cross-curling
  • 相关文献

参考文献2

同被引文献14

  • 1虞松,陈军,阮雪榆.韧性断裂准则的试验与理论研究[J].中国机械工程,2006,17(19):2049-2052. 被引量:31
  • 2中山一雄.金属切削加丁理论[M].李云芳译.北京:机械工业出版社,1985.
  • 3OZEL T, ZEREN E. Finite element method simulation of machining of AISI 1045 steel with a round edge cutting tool [ C]//Proceedings of the 8th CIRP International Workshop on Modeling of Machining Operations Chemnttz aermany Chemnite : [ s. m. ] ,2005:533-542.
  • 4HADDAG B, MAKICH H, NOUARI M, et al. Tribological behaviour and tool wear analyses in rough turning of large- scale parts of nuclear power plants using grooved coated in- sert[J]. Tribalogy International, 2014, 80(6) :58-70.
  • 5Arrazola P J, Ozel T, Umbrello D, et al. Recent advances in modelling of metal machining processes [ J ]. CIRP An- nals-Manufacturing Technology, 2013, 62 (2) : 695-718.
  • 6KLOCKE F, LUNG D, ESSIG C. 3D FEM model for the prediction of chip breakage [ J ]. Advanced Materials Re- search, 2011, 223(1): 142-151.
  • 7Klocke F, Lung D, Buchkremer S. Inverse identification of the constitutive equation of Inconel 718 and AISI 1045 from FE machining simulations [ J]. Procedia CIRP, 2013 (8) :212-217.
  • 8蒲思洪,温彤,吴维,侯模辉.韧性断裂准则与阀值选取的理论及试验研究[J].热加工工艺,2009,38(3):18-21. 被引量:34
  • 9左健民,胡艳艳,汪木兰,费树岷,顾雪艳.基于J-C模型的Ti6Al4V切屑成形有限元模拟与分析[J].机床与液压,2009,37(11):7-10. 被引量:11
  • 10陈永洁,黄威武.切屑三维卷曲的运动学分析[J].中国机械工程,2000,11(5):513-515. 被引量:4

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部