期刊文献+

稀土对6063铝合金热塑性的影响 被引量:5

EFFECT OF MISCH METAL ON THE HOT PLASTICITY OF AN Al-Mg-Si ALLOY
原文传递
导出
摘要 采用热扭转试验、扫描电镜和透射电镜观察,研究了混合轻稀土对6063铝合金热塑性的影响规律,探讨了稀土的影响机制。结果表明,在480—560℃的温度范围内,混合轻稀土的加入能显著提高6063铝合金的热塑性;加稀土的 RE6063合金不经均匀化退火,其热塑性就与已均匀化处理的6063铝合金相当。通过组织观察和分析,讨论了稀土提高热塑性和改善铸态、均匀化态组织之间的关系。 The effects of the addition of misch metal on the hot plasticity andmicrostructure of an Al-Mg-Si alloy(6063)have been investigated by using the hottorsional test,SEM and TEM.The results show that the hot plasticity of the 6063 alumi-num alloy is obviously increased in the range from 480℃ to 560℃ when misch metal is ad-ded to the alloy.The hot plasticity of the unhomogenized RE6063 alloy approaches that ofthe homogenized 6063 alloy,and the homogenizing annealing process for RE6063 alloymay be canceled.The relations between the hot plasticity and the microstructures are dis-cussed.
机构地区 重庆大学
出处 《材料科学进展》 CSCD 1990年第3期212-217,共6页
基金 国家自然科学基金 58901412
关键词 稀土 铝合金 热塑性 显微组织 aluminum alloy misch metal hot plasticity microstructure constituent phase
  • 引文网络
  • 相关文献

参考文献3

二级参考文献11

  • 1周守则,潘复生,丁培道,刘晶元,陈家应.稀土对6063合金均匀化退火组织的影响[J].轻合金加工技术,1989,17(9):28-33. 被引量:4
  • 2张淑芬,孙长英,王冰.稀土铝型材光学性质的研究[J].稀土,1989,10(1):52-53. 被引量:2
  • 3顾根大,陈玉勇,安阁英.铈对铝铜合金固液界面形态和稳定性的影响[J]中国稀土学报,1987(02).
  • 4B. Closset,J. E. Gruzleski. Structure and properties of hypoeutectic Al-Si-Mg alloys modified with pure strontium[J] 1982,Metallurgical Transactions A(6):945~951
  • 5张密林,鲁化一,唐定骧.稀土在铝及其合金中的应用进展[J]稀土,1988(05).
  • 6李道韫,何镇明,赵宇光,王守实,刘振东.稀土对铸铝合金中气孔形成的影响[J]中国稀土学报,1987(04).
  • 7王绍苓,周小平,黄大千,余应梅,关淑菊.铈对Al-Mg-Si合金断裂特性的影响[J]中国稀土学报,1987(03).
  • 8赵敏寿,冯力,唐定骧.浅议铝电解槽制备铝—稀土合金方法[J]稀土,1986(03).
  • 9陈玉勇,李庆春,周彼德.稀土金属在我国铸造有色合金中的应用[J]稀土,1985(03).
  • 10李道韫,杜维玺,刘勇兵,杨荣光,姜兆梦,张健,潘忠耀,孙福成.微量稀土变质工艺对铝—硅共晶合金组织及性能的影响[J]稀土,1983(02).

共引文献26

同被引文献73

引证文献5

二级引证文献45

相关主题

;
使用帮助 返回顶部