期刊文献+

基于Petri网的产品拆卸过程规划 被引量:6

Disassembly Process Planning of Products Based on Petri Nets
下载PDF
导出
摘要 引用拆卸优先矩阵来描述产品零件间的物理特性,并以优先矩阵为基础,以Petri网为工具,建立了包括零部件回收价值及拆卸成本在内的产品拆卸Petri网模型,采用Petri网基于不变量的性能分析方法,对模型进行求解,得到了满足需求约束的最佳拆卸序列。 The physical characteristics between the parts of the product were described with disassembly precedence matrix in the paper. And then, based on disassembly precedence matrix and Petri nets, a disassembly Petri nets (DPN) model including recovery value and disassembly cost was established. The invariable capability analyses method based on Petri nets was introduced. The optimal disassembly sequence that satisfied the requirement constraints was gained by using this model.
出处 《农业机械学报》 EI CAS CSCD 北大核心 2006年第7期138-141,共4页 Transactions of the Chinese Society for Agricultural Machinery
关键词 拆卸过程规划 PETRI网 模型 Disassembly process planning, Petri nets, Model
  • 引文网络
  • 相关文献

参考文献7

二级参考文献18

  • 1徐家球,汪劲松,邱述斌,张伯鹏.装配顺序的与或图生成算法研究[J].机械工程学报,1994,30(4):36-41. 被引量:19
  • 2何新贵.模糊Petri网[J].计算机学报,1994,17(12):946-950. 被引量:53
  • 3邱静,彭智华,温熙森,唐丙阳.柔性加工单元故障诊断的模糊Petri网模型[J].国防科技大学学报,1996,18(2):38-42. 被引量:6
  • 4李凡长 朱维华.动态模糊逻辑及其应用[M].昆明:云南科技出版社,1997,11..
  • 5尽垆.实用模糊数学[M].北京:科学技术文献出版社,1988..
  • 6[1]Zussman E,Kriwet A,Seliger G. Disassembly-oriented assessment methodology to support design for recycling. Annals of the CIRP,1994,43(1):9~14
  • 7[3]Tang Ying,Zhou Mengchu,Zussman Eyal,et al. Disassembly modeling,planning,and application:a review. In:Proceedings of the 2000 IEEE International Conference on Robotics & Automation,2000
  • 8[4]Zhang H C,Kuo T C. A graph-based disassembly sequence planning for EOL product recycling. IEEE/CPMT Int'l Electronics Manufacturing Technology Symposium,1997
  • 9[5]Pnueli Y,Zussman E. Evaluating the end-of-life of a product and improving it by redesign. Int. J. Prod. Res.,1997,35(4):921~942
  • 10[1]Jovane F,Alting L,Armillotta A,et al. A key issue in product life cycle:disassembly. Annals of the CIRP, 1993 , 42(2):651~658

共引文献29

同被引文献33

引证文献6

二级引证文献40

;
使用帮助 返回顶部