期刊文献+

两种搅拌方式对超硬石膏抗压强度的影响 被引量:5

Comparison of the Influence to the Compressive Strength of Super hard Gypsum Between two Mix Techniques
下载PDF
导出
摘要 目的观察手工搅拌与真空机械搅拌两种工艺对超硬石膏抗压强度的影响。方法参照ISO06873《牙科石膏产品》标准,用手工和真空机械两种搅拌方式各制取长40(±0.4)mm、直径20(±0.2)mm的试件10件,用Zwick/RoellZ050抗压强度试验机测试其抗压强度,所得数据进行统计分析。结果两种搅拌方式制取的超硬石膏试件,抗压强度方面表现出了明显的不同(P<0.01)。从数据上可以看出,真空搅拌方式制取的石膏试件抗压强度高。结论用真空机械搅拌方式调拌超硬石膏可以提高石膏模型的抗压强度,并可以保证其抗压强度性能的稳定。 Objective To compare the different influence to the compressive strength of super hard gypsum between two mix techniques. Method According to the standard for dental gypsum products (ISO6873), 10 samples were made by manual work and another 10 by vacuum mechanical mix,all the samples axe 20 (±0.2)mm in diameter and 40 (±0.4)mm in length. The compressive strength was tested by a compressive strength testing machine——Zwick/Roell Z050. The data were analyzed with analysis of variance. Result Samples made by two different mix techniques showed significant differences in their compressive strength (P 〈 0.01). The data shows the samples mixed by vacuum blender have the higher compressive strength. Conclusion Vacuum mechanical mix technique improves the compressive strength of gypsum models, and ensures the stability of their properties of compressive stength.
出处 《上海生物医学工程》 2006年第3期175-178,共4页 Shanghai Journal of Biomedical Engineering
关键词 超硬石膏 抗压强度 搅拌方式 super hard bypsum compressive strength mix technique
  • 引文网络
  • 相关文献

参考文献7

二级参考文献12

  • 1程静涛,郭天文.托盘间隙对藻酸盐印模材取模精度的影响[J].临床口腔医学杂志,1997,13(2):109-111. 被引量:8
  • 2Chaffee NR,Bailey JH,Sherrard DJ.Dimensional accuracy of improved dental stone and epoxy resin die materials.PartⅠ:Single die[J].J Prosthet Dent,1997,77 (2):131 ~ 135
  • 3Lautenschlager EP,Corbin F.Investigation on the expansion of dental stone[J].J Dent Res,1969,48 (2):206~ 210
  • 4Tomita H,Minagi S,Akagawa Y.Prevention of acquired immunodeficiency syndrome and hepatitis B.Part Ⅳ:The effect of impression material on glutaraldehyde solution[J].J Prosthet Dent,1990,64 (5):573 ~ 577
  • 5Craig RG,Powers JM,Wtaha JC,et al.Dental Materials Properties and Manipulation [J].Seventh Edition,2000:139~207
  • 6Takahashi J,Kitahara K,Teraoka F,et al.Resin pattern material with low polymerization shrinkage [J].Int J Prosthodont,1999,12 (4):325v329
  • 7Blair FM,Wassell RW.A survey of the methods of disinfection of dental impressions used in dental hospitals in the United Kingdom[J].Br Dent J,1996,25,180 (10):369~375
  • 8Vermilyea SG,Huget EF.Evaluation of resin die materials[J].J Prosthet Dent,1979,42 (3):304~ 307
  • 9Lindquist TJ,Stanford CM.Development and application of a new abrasion testing device[J].J Prosthet Dent,2000,84(6):635~641
  • 10Alsadi S,Combe EC,Cheng YS.Properties of gypsum with the addition of gum arabic and calcium hydroxide [J].J Prosthet Dent,1996,76 (5):530~534

共引文献21

同被引文献52

引证文献5

二级引证文献7

;
使用帮助 返回顶部