摘要
对环模生物质颗粒燃料成型机影响成型的各主要因素进行了分析及试验研究,给出不同生物质原料、粒度、含水率、环模孔长径比等因素与颗粒成型率及吨料电耗的关系,找出生物质颗粒燃料的最佳成型条件。
Some primary factors of biomass fuel cold compression molding was analyzed. The relation of granule molding ratio and electricity per ton was obtained the factors of material, granularity, containing water ratio and length and diameter ratio of annulw mould, and worked out the best conditions of biomass cold compression molding.
出处
《太阳能学报》
EI
CAS
CSCD
北大核心
2006年第9期937-941,共5页
Acta Energiae Solaris Sinica
基金
国家高科技研究发展计划(863)(2001AA514015)
关键词
生物质颗粒燃料
粒度
含水率
成型率
吨料电耗
biomass granule fuel
granularity
containing water ratio
granule molding ratio
electricity cost
