期刊文献+

聚乙烯/造纸污泥废弃物复合材料 被引量:7

STUDY ON POLYETHYLENE/WASTE SLUDGE OF PAPERMAKING WASTE COMPOSITE
下载PDF
导出
摘要 研究填料粒径和用量对聚乙烯/造纸污泥废弃物复合材料力学性能的影响。采用氢氧化钠和KH-550硅烷作为填料的表面处理剂,马来酸酐接枝聚乙烯作为体系的相容剂改善复合材料的综合性能。实验结果表明,这2种方法均可不同程度地提高复合材料的力学性能,马来酸酐接枝聚乙烯的加入可以有效改善基体与填料之间的相互作用。 The effect of filler particle size and content on the mechanical behavior of waste sludge of papermaking-reinforced polyethylene waste composite was investigated.In order to improve the general performance of the composite,the sodium hydroxide and KH-550 silane acting as filler modification agents and maleic anhydride modified polyethylene acting as additive of the system were applied.The results show the two kinds of agents can enhance the mechanical performance of the composite.At the same time,the maleic anhydride modified polyethylene can improve the adhesion between the matrix and the filler.
出处 《环境工程》 CAS CSCD 北大核心 2007年第1期59-60,63,共3页 Environmental Engineering
关键词 聚乙烯 造纸污泥 废弃物 复合材料 polyethylene, waste sludge of papermaking and waste composite
  • 引文网络
  • 相关文献

参考文献6

  • 1田中建,邱化玉.二次纤维的造纸特性[J].黑龙江造纸,2004,32(3):14-15. 被引量:15
  • 2王海毅,郝妮.直接加填与纤维加填对碳酸钙在循环中留着的影响[J].国际造纸,2005,24(2):37-40. 被引量:8
  • 3U.Yilmazer,R.J.Farris,J.Appl.Polym.1983,(28):3369-3372.
  • 4A.Y.Kandeil.R.R.Zahran,ect.Polymers and other advanced material:Emerging technologies and business opportunities,Plenum,New York,1995:125-128.
  • 5R.R.Zahran.Effect of sand addition on the tensile properties of compression moulded sand/polyethylene composite system.Materials Letters,1998,(34):161-167.
  • 6H.S.卡茨,J.V.米路西凯.塑料用填料及增强剂手册.北京:化学工业出版社,1985,24.

二级参考文献5

共引文献19

同被引文献78

引证文献7

二级引证文献21

;
使用帮助 返回顶部