期刊文献+

晶粒尺寸为10—30μm的Ni_3Al基合金的超塑行为 被引量:3

SUPERPLASTICITY BEHAVIOURS OF Ni_3Al ALLOY WITH 10-30μm GRAIN SIZES
下载PDF
导出
摘要 研究了晶粒尺寸为10—30μm的Ni3Al基合金的高温变形行为发现该合金在950—1100℃温区,应变速率约为2.1×10-4s-1时应变速率敏感指数m>0.3,最大延伸率超过250%,具有超塑变形行为的特征金相及电子显微镜观察表明,变形过程中发生了明显的连续回复与再结晶. The superplasticity behaviours of Ni3Al alloy with 10-30 pm grain sizes were investigated. The superplastic flow with a maximum elongation of 256% and strain rate sensitivity of 0.3 to 0.7 were observed at temperature range from 900 to 1100℃ and initial rate 2.1 ×10-4 s-1. As combined with optical and TEM observations, it is suggested that a continuous recovery and recrystallization process took place and superplasticity may arise from this process.
机构地区 上海交通大学
出处 《金属学报》 SCIE EI CAS CSCD 北大核心 1997年第3期325-329,共5页 Acta Metallurgica Sinica
基金 国家自然科学基金
关键词 晶粒尺寸 超塑性 镍铝合金 金属间化合物 Ni_3Al, grain size, superplasticity
  • 引文网络
  • 相关文献

参考文献7

  • 1Lin Dongliang,Intermetallics,1996年,4期,489页
  • 2Lin Dongliang,Acta Metall Sin,1995年,8卷,419页
  • 3Lin Dongliang,Scr Metall Mater,1995年,33卷,685页
  • 4单爱党,金属学报,1995年,31卷,B35页
  • 5Lin Dongliang,Scr Metall Mater,1994年,31卷,1455页
  • 6Yang H S,Scr Metall Mater,1990年,25卷,1223页
  • 7林兆荣,金属超塑性成形原理及应用,1990年,11页

同被引文献67

引证文献3

二级引证文献28

;
使用帮助 返回顶部