期刊文献+

基于CCP协议汽车电控单元标定系统的设计 被引量:8

Design of Calibration System Based on CCP on Automobile Electronic Control Unit
下载PDF
导出
摘要 介绍了CCP协议的基本原理、通信方式以及用于ECU标定的各种工作模式,讨论了一种基于该协议的汽车电控单元标定系统的设计方法。实际应用结果表明,该标定系统可以有效地实现对多个汽车电控单元进行在线标定,并可以针对不同用户需求提供不同的定制功能,在汽车电子控制系统开发中将能得到较好的应用。 The principle and communication method of CCP protocol and the various working modes of ECU's calibration were introduced, and the design method of calibration system based on CPP protocol on automobile electronic control unit was discussed. The test results show that the calibration system can calibrate multiple ECUs of automobile system effectively and that different customized functions are available according to customer's requirements. Accordingly, the system can be well used in the development of the automobile electronic control unit.
出处 《车用发动机》 北大核心 2007年第3期59-63,共5页 Vehicle Engine
基金 国家863计划项目(2006AA11A1C1) 重庆市科委基金项目(2006AB2026)
关键词 CCP协议 CAN总线 标定系统 电控单元 主/从设备 CCP protocol CAN bus calibration system ECU master/slave device
  • 相关文献

参考文献9

  • 1Delic-Ibukic A,Hummels D M.Continuous digital calibration of pipeline A/D converters Delic-Ibukic[J].IEEE Transactions,2006,55(4):1175-1185.
  • 2Kleinknecht H.CCP CAN Calibration Protocol[C].Europe:H.Kleinknecht,1999.
  • 3James Allen W.Calibration Development with Production Intent Electronic Control Units,Delphi Delco Electronics Systems[C],SAE 2000 World Congress,2000.
  • 4Kim Lemon.Introduction To CAN Calibration Protocol[C].Europe:Kim Lemon,2003.
  • 5Stocher W,Biegelbauer G.Automated Simultaneous Calibration of a Multi-View Laser Stripe Profiler Stocher[J].Proceedings of the 2005 IEEE International Conference,2005,(4)18/22:4424-4429.
  • 6Reorda M S,Violante M.On-line analysis and perturbation of CAN networks Reorda[J].19th IEEE International Symposium,2004,10,(10/13):424-432.
  • 7Jean J.Labrosse.嵌入式系统构件[M].袁勤勇,黄绍金,唐青,等译.北京:机械工业出版社,2002.
  • 8Vector Informatik GmbH.CCP Driver (Implementation in Electronic Control Units CCP Version 2.1)[M].[s.l.]Vector Informatik GmbH,Rev.2002:1-37.
  • 9李雅博,张俊智,甘海云,卢青春.基于CCP协议的HEV用ECU标定系统设计[J].汽车工程,2004,26(4):375-378. 被引量:23

二级参考文献5

  • 1[1]Kleinknecht H. CAN Calibration Protocol, Version 2.1, ASAP Standard, 1999
  • 2[2]Kim Lemon. Introduction To CAN Calibration Protocol, Version 2.0,Vector CANtech Inc. ,2003
  • 3[3]Yoshihiro Kawase Takanao Suzuki,Denso and ETAS Collaborate on European Projects, Denso Corporation, 2003
  • 4[4]James Allen W. Calibration Development with Production Intent Electronic Control Units, Delphi Delco Electronics Systems, SAE 2000 World Congress,2000
  • 5[5]JEAN J. LABROSSE.μC/OS - Ⅱ: the Real Time Kernel. R&D Books. 2000

共引文献22

同被引文献31

引证文献8

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部