期刊文献+

新型双压力角渐开线钟表齿轮 被引量:1

New Involute Clock Gear with Double Pressure Angles
下载PDF
导出
摘要 在计时仪器中,仪表齿轮性能直接决定了计时准确性。目前计时仪器中广泛采用仪表圆弧齿轮,其加工刀具的刃口为复杂曲线,成形较为困难,不利于刀具制造。文章利用渐开线刀具的齿廓为直线,刃口成形容易的特点,根据钟表齿轮的传动要求,提出了一种双压力角渐开线齿形,即将轮片的齿廓设计为具有拐点的齿形,以减小进啮角,提高进啮点的啮合效率。 Now instrument arc gear has been widely used in mechanical timekeeping instrument. As the cutting edge is a kind of complicated curve, it is difficult to form, hard in manufacture of cutting tool. By using rectilinear characteristic of involute cutter easy in form cutter edge and according to clock and watch gear drive demands, this paper has put forward involute toothing with double pressure angles. That is to design the blade tooth contour with inflection point,so as to reduce the enter-mesh argle,rise the mesh efficiency of the entermesh point.
出处 《轻工机械》 CAS 2008年第1期28-30,共3页 Light Industry Machinery
关键词 钟表齿轮 啮合过程 双压力角渐开线齿形 clock gear meshing process, involute gear with double pressure angles
  • 引文网络
  • 相关文献

参考文献6

二级参考文献11

  • 1陈文华.渐开线齿廓的圆弧拟合[J].机电工程,1994,11(4):22-25. 被引量:1
  • 2陈文华.计时仪器中渐开线齿轮啮合过程的分析[J].仪器仪表学报,1996,17(3):253-261. 被引量:5
  • 3叶松林,浙江大学学报,1991年,增刊,174页
  • 4叶松林,仪表技术与传感器,1988年,3期,22页
  • 5仙波正庄,钟表齿轮,1981年
  • 6高恩华,钟表,1979年,7期,23页
  • 7酒井高男 森田信义 马兴邦 译.关于定力矩比齿轮的研究[J].钟表,(1):7-28.
  • 8李鸣.用于钟表增速传动渐开线齿轮的研究[D].哈尔滨:哈尔滨工业大学,1984.
  • 9容光义.关于渐开线齿形的若干问题.钟表,1979,(9):1-21.
  • 10高恩华译 季申柯著.钟表机构渐开线齿轮传动的研究.钟表,1979,(7):23-42.

共引文献14

同被引文献2

引证文献1

二级引证文献4

;
使用帮助 返回顶部