期刊文献+

矿化剂和烧成温度对合成锆莫来石材料的显微结构与性能的影响

Effect of Addtive and Sintering Temperature on Microstructure and the Properties of Zirconia-mullite Material
下载PDF
导出
摘要 运用精细化工艺方法,选择适当的矿化剂,采用矾土生料和锆英石砂烧结合成锆莫来石材料,试验表明:引入矿化剂或提高烧成温度均可以促进锆英石的分解,加速固相反应和烧结的进行。1550℃保温2小时烧后的试样具有良好的显微结构和常温性能。 Zirconia-mullite material has been prepared by using raw bauxite and zircon. A proper addtive was introduced into the batch and a fine process was adopted. The results show that the reaction and sintering can be accelerated by the addtive or improving temperature. The samples have fine microstructure and properties after sintered at 1550 ℃ and holding on 2 hours.
出处 《河北理工大学学报(自然科学版)》 CAS 2007年第3期85-90,共6页 Journal of Hebei Polytechnic University:Social Science Edition
关键词 锆莫来石 矿化剂 烧成温度 显微结构 zirconia-mullite additive sintering temperature microstructure
  • 引文网络
  • 相关文献

参考文献8

二级参考文献16

  • 1郭瑞松,贺振富,杨正方,袁启明,陈玉如.缺陷控制与ZTM/SiC_p复合陶瓷的强度[J].硅酸盐学报,1995,23(1):92-96. 被引量:4
  • 2张浩,无机材料学报,1992年,3期
  • 3张浩,硅酸盐学报,1991年,5期,477页
  • 4李志宏,1990年
  • 5Wu Jennming,J Mater Sci,1991年,26卷,4631页
  • 6盛绪敏,硅酸盐学报,1988年,16卷,1期,1页
  • 7贺振富,中国有色金属学报,1995年,5卷,增2期,88页
  • 8杨云鹏,1995年
  • 9蒋新,博士学位论文,1994年
  • 10Wu M,Ceram Trans,1991年,19卷,665页

共引文献46

;
使用帮助 返回顶部