期刊文献+

聚乳酸短纤维拉伸、卷曲工艺研究 被引量:4

Investigation on Drawing and Crimping Processes of PLA Staple Fiber
下载PDF
导出
摘要 研究了油浴温度及拉伸倍数对聚乳酸纤维的断裂强度、伸长、模量、结晶度和晶区取向的影响,还研究了卷曲工艺对聚乳酸纤维卷曲性能的影响。结果表明:与提高卷曲板压力相比,适当提高卷曲温度对改善聚乳酸短纤维卷曲性能效果更好。 The effect of oil bath temperature and draw ratio on the mechanical properties and morphology of PLA fiber were studied. In addition, the influences of the crimping process on the crimping property of PLA fiber were also investigated. The results showed that the fiber with better crimping orooerties was manufactured via higher crimping temperature.
出处 《合成纤维》 CAS 北大核心 2008年第3期41-44,共4页 Synthetic Fiber in China
关键词 聚乳酸 拉伸 卷曲 性能 PLA, drawing, crimp, property
  • 引文网络
  • 相关文献

参考文献12

  • 1James Lunt. Polylactic acid polymer for fibers and nonwovens [J].International Fiber Journal, 2000, 15(6):48-52.
  • 2刘森.玉米纤维性能与用途的探讨[J].产业用纺织品,2002,20(4):39-41. 被引量:19
  • 3Masanobu Ajioka. Biodegradable polymer ‘LACEA' development of polylactic acid by the direct condensation polymerization[J]. 纤维学会志,1996,52(6):232-236.
  • 4Ray E Drumright, Patrick R Gruber, David E Henton. Polylactic acid technology[J]. Advanced Material, 2000,23(12): 1 841-1 846.
  • 5G Schmack, B tandler, et al. Biodegradable fibers of poly (i-lactide) produced by high-speed melt spinning and spin drawing [J]. Journal of Applied Polymer Science, 1999, 73:2 785.
  • 6PenningsAT, et al. Melt-spun and solution-spun fibers [J]. Polymer, 1982, 23:1587-1592.
  • 7Gogolew sk I S, Pennings A J. Resorbable materials of poly (L - lactide). Ⅱ. fibers spun from solutions of poly (L-1 actide) in cood solvents [J]. Journal of Applied Ppolymer Science, 1983, 28:1045-1061.
  • 8Fambri L, Pegoretti A , et al. Biodegradable fibers of poly(L -lactic A cid ) produced by melt spinning[J]. Polymer, 1997, 38 (1) : 79-85.
  • 9PegorettiA, Fambrr L, M igliaresi C. Invitro degradation of poly (L- lactic acid) fibers produced by meh-spinning [J]. Apply Polym Sci, 1997, 64 (2) : 213-223.
  • 10顾书英,任杰.可生物降解纤维—聚乳酸(PLA)纤维——第Ⅰ报·研究进展[J].合成纤维,2003,32(3):10-12. 被引量:33

二级参考文献2

共引文献51

同被引文献28

引证文献4

二级引证文献21

;
使用帮助 返回顶部