摘要
NC程序的自动产生是受软件的后置处理功能控制的,后置处理文件的编辑和设定,对所有的CAD/CAM软件都是需要的。但是使用者经常忽略这一点,在每次生成NC程序后去对程序进行修改,不仅浪费时间,而且容易出错导致事故。文中介绍了Mastercam后处理文件的内容以及修改和设置的方法。
The automatic generation of NC program is controled by the software＇s post management function. The compilation and confirmation of the postprocessing file are required to all CAD/CAM software.But user often neglet it, who modify the NC program after every generation of NC program, that not only fools time, but also goes wrong easily and result in accident. This paper will discuss the content of Mastercam postprocessing file and the method to modify and set up.
出处
《机械工程师》
2008年第4期40-42,共3页
Mechanical Engineer
关键词
程序
修改
后置处理
program
modify
post management
