期刊文献+

电站轴流风机常见故障及处理措施 被引量:16

Common Failures of Power Plant's Axial-flow Blowers and the Remedy
下载PDF
导出
摘要 分析了火电厂锅炉轴流风机的常见故障及其原因,包括:进气冲角增大、管道阻力增加导致的风机失速与喘振;由运行工况、工质和叶片质量引起的叶片断裂;因润滑不良、冷却不够和轴承异常引起的轴承温度偏高;叶片非工作面积灰、磨损、倾角大引起的风机振动等,从而提出了解决措施。 Causes of common failures frequently encountered during operation by axial-flow blowers of fossil power plants were analyzed, such as stalling and surging caused by growth of flow inlet angle and/or pipe resistance; blade ruptures caused by bad working conditions, poor quality of working medium and blade ; high temperature of bearings caused by poor lubrication, insufficient cooling and abnormal working conditions ; vibration caused by ash deposit and erosion on blade's non-working face, or by the large inclination angles etc. Meanwhile countermeasures for handling above problems are proposed.
出处 《发电设备》 2008年第3期231-236,共6页 Power Equipment
关键词 能源与动力工程 火电厂 轴流风机 叶片断裂 喘振 振动 energy and power engineering axial-flow blower blade fracture surging vibration
  • 引文网络
  • 相关文献

参考文献5

二级参考文献7

共引文献22

同被引文献72

引证文献16

二级引证文献29

相关主题

;
使用帮助 返回顶部