期刊文献+

铝合金厚板淬火残余应力的研究进展 被引量:21

Research Development of Quenching-induced Residual Stress of Aluminum Thick Plates
下载PDF
导出
摘要 结合作者近期的研究工作分析了铝合金厚板淬火残余应力的形成机理及分布;介绍了采用有限元技术开展铝合金厚板淬火残余应力数值模拟的研究进展;根据实验和数值模拟结果,提出了一种可较好解释铝合金厚板淬火残余应力形成机理与分布的局部平衡的"应力与应变波动"模型;分析了该领域存在的主要研究困难,指出了其研究方向。 The forming mechanism and distribution of the quenching-induced residual stress of aluminum alloy thick plates are summarized. The development of research using FEM is also introduced. According to the results of experiment and numerical simulation, a local balanced stress and strain shift model for explaining the formation mechanism and distribution laws of quenching-induced residual stress in the aluminum alloy thick plates is proposed. Furthermore, the main existing problems in research and the study direction are also pointed out.
出处 《材料导报》 EI CAS CSCD 北大核心 2008年第6期70-74,共5页 Materials Reports
基金 国家重点基础研究发展规划"973"项目(G1999064908)
关键词 铝合金 厚板 淬火残余应力 形成机理 数值模拟 aluminum alloy, thick plate, quenching-induced residual stress, forming mechanism, FEM
  • 引文网络
  • 相关文献

参考文献33

二级参考文献62

  • 1曾苏民.降低超厚铝合金锻件残余应力的试验[J].中国有色金属学报,1996,6(3):67-70. 被引量:7
  • 2李自刚 张鸿冰.-[J].金属热处理学报,1999,(4).
  • 3(美)E R G·埃克特等 航春(译).传热与传质分析[M].北京:科学出版社,1983..
  • 4(日)米谷茂.残余应力的产生和对策[M].北京:机械工业出版社,1975.245-257.
  • 5陈达 水晓平 等.-[J].机械工程学报,1990,6(8):77-77.
  • 6米古茂[日] 朱荆璞等(译).残余应力的产生和对策[M].北京:机械工业出版社,1983..
  • 7[美]ATSM E837-81 顾唯明(译).用钻孔应变测量决定残余应力的标准方法[J].机械强度,1986,8(1):40-43.
  • 8美国金属学会.金属手册(第四卷)[M].北京:机械工业出版社,1998..
  • 9[1]Totten G W, Webster G M, Tensi H M, Liscic B. Standards for cooling curve analysis of quenchants[ J ]. Heat Treatment of Metals, 1997, (4): 92~94.
  • 10[3]Beck J V et al. Inverse Heat Conduction: Ⅲ-posed Problems[ M]. John Wilely & Sons, Inc., New York, 1985:218~242.

共引文献233

同被引文献184

引证文献21

二级引证文献95

;
使用帮助 返回顶部