期刊文献+

滑动轴承无摩擦接触参数的边界元分析 被引量:4

ANALYSIS ON CONTACT PROBLEMS OF JOURNAL BEARING WITHOUT FRICTION BY USING BOUNDARY ELEMENT METHOD
下载PDF
导出
摘要 应用边界单元法(BEM),对平面应变情况下滑动轴承无摩擦接触时的接触参数进行了分析计算,并与常规Hertz公式计算结果进行了对比。结果表明,用边界单元法可以提高接触参数的计算精度,并妥善解决了Hertz公式计算值偏低的问题。另外在分析了轴承系统尺寸、材料参数及载荷变化因素而进行相应计算的基础上,给出了滑动轴承接触参数计算的经验公式。 The contact parameters of journal bearing without friction under plane strain conditions were calculated by using boundary element method. The result was compared with that of classicai Hertzian theory. The calculation precision was improved by using the boundary element method, and the problem about lower value from Hertz formula was solved. The experiential calculation formulas were obtained with consideration of some parameters for the journal bearing.
出处 《石油大学学报(自然科学版)》 CSCD 1997年第6期56-58,共3页 Journal of the University of Petroleum,China(Edition of Natural Science)
关键词 滑动轴承 接触参数 边界元分析 Journal bearing Contact parameters Friction Calculation
  • 引文网络
  • 相关文献

参考文献5

  • 1徐秉业,接触力学(译),1992年
  • 2王璞,数值方法大全.科学计算的艺术(译),1991年,35页
  • 3团体著者,机械工程师手册.上,1989年
  • 4邱宣怀,机械设计,1989年
  • 5Chen H H,博士学位论文,1984年

同被引文献32

引证文献4

二级引证文献9

;
使用帮助 返回顶部