期刊文献+

7xxx系铝合金的研究现状及发展趋势 被引量:84

Current Research Status and Development Trends of 7xxx Series Aluminum Alloys
下载PDF
导出
摘要 评述了国内外7xxx系铝合金的研究及工业应用概况,讨论了热处理工艺对7xxx系铝合金微观组织与性能的影响,介绍了相关的表征技术。针对目前7xxx系铝合金在研究以及产业化应用中存在的问题,指出实现7xxx系铝合金的高强、高韧以及低应力腐蚀(SCC)敏感性将成为今后研究和开发工作的主要方向,并提出了具体的建议。 The progress of the research and application of 7xxx series aluminum alloys is reviewed. The effect of the heat treatment technology on the microstructure and properties of 7xxx series aluminum alloys are discussed, and the corresponding characterization technique is introduced. It will be the main research aspect to realize the highstrength, the high-toughness and low SCC susceptibility of 7xxx series aluminum alloys. Finally, some specific suggestions for the future research and development of 7xxx series aluminum alloys are proposed, based on the existing problems in the present research and application.
出处 《材料导报》 EI CAS CSCD 北大核心 2009年第3期67-70,共4页 Materials Reports
基金 国家自然科学基金资助项目(50771093)
关键词 7XXX系铝合金 热处理工艺 微观组织 表征技术 7xxx series aluminum alloys, heat treatment technology, microstructure, characterization technique
  • 引文网络
  • 相关文献

参考文献39

  • 1宋仁国.高强度铝合金的研究现状及发展趋势[J].材料导报,2000,14(1):20-21. 被引量:154
  • 2Song R G, Zhang Q Z. J Mater Proc Techn, 2001, 117:84
  • 3Song R G, Zhang Q Z. Mater Sci Eng C, 2001, C17:133
  • 4Robinson J S, Tanner D A. Mater Sei Forum, 2006, 524- 525 : 305
  • 5Joachim Wloka, et al. Corros Sci,2007,49(3) : 1437
  • 6刘晓涛,崔建忠.Al-Zn-Mg-Cu系超高强铝合金的研究进展[J].材料导报,2005,19(3):47-51. 被引量:83
  • 7Tanner D A, et al. Mater Sci Techn, 2006,22 (1) : 77
  • 8Imamura T. J Jpn Inst Light Met,1999,49(7):302
  • 9Lukasak D A,et al. Adv Mater & Processes, 1991,10:46
  • 10周鸿章,李念奎.铝-21世纪基础研究与技术发展研讨会论文集(第一分册)[C].长沙:中南大学出版社,2002:56

二级参考文献117

共引文献400

同被引文献733

引证文献84

二级引证文献226

;
使用帮助 返回顶部