摘要
对20根配有500 MPa钢筋作为抗剪箍筋的混凝土梁进行试验,分析加载方式、混凝土强度、截面形式以及配箍率对混凝土梁斜裂缝宽度的影响.在试验的基础上,建立合理的计算模型,推导钢筋混凝土梁斜裂缝宽度的计算公式.研究结果表明,采用建议的计算公式可以定量计算钢筋混凝土梁受剪斜裂缝宽度,计算结果满足工程应用精度要求.
Experimental investigation of 20 concrete beams with 500 MPa steel bars as stirrups was performed.The effect of loading form,concrete strength,section shape and stirrup ratio on diagonal crack width was analyzed.Based on reasonable computation models and experimental results,a formula for calculation of diagonal crack width of reinforced concrete beams was derived.From the test results it could be seen that the diagonal crack width could quantitatively be estimated with the suggested formula and the computation result met the requirement of accuracy for engineering application.
出处
《兰州理工大学学报》
CAS
北大核心
2009年第4期124-128,共5页
Journal of Lanzhou University of Technology
基金
河北省自然科学基金(E2007000064)
关键词
高强箍筋
混凝土梁
使用阶段
斜裂缝宽度
high-strength stirrup
concrete beam
service stage
diagonal crack width