Tencel纤维家纺面料的工艺优化

Processing Optimization of Tencel Fiber Household Fabric

探讨Tencel纤维家纺面料生产工艺。分析论述了Tencel A100纤维的性能特点及在纺纱、织造各工序生产中的工艺技术措施。通过严格控制清梳工艺减少纤维损伤;选择涂炭黑涂料胶辊解决并条返花问题;采用较大粗纱捻系数;优选细纱牵伸工艺;优化浆料配方、采用中压上浆;织机合理调节经位置线、应用大张力、早开口、迟引纬等措施;严格控制各工序温湿度,成功开发和生产出满足要求的家纺面料产品。

Processing of Tencel fiber household fabric was discussed. Property of Tencel A100 as well as its related processing technology measures in each spinning and weaving process were analyzed and introduced. Fiber injury should be controlled strictly in blowing and carding processing. Rubber-covered roll coated charcoal paint was selected to avoid returning flow of fiber. Larger twist factor was selected in roving process. Spinning draft processing was optimized. Siz- ing instruction was optimized and medium pressure was adopted in sizing. Measures of reasonable warp shed line,larger tension, earlier open later weft inserting et al were applied in weaving process. Temperature and humidity in each process should be controlled strictly,househnld fabric which should reach use demands could be produced.