期刊文献+

多聚合物组元石蜡基MIM粘结剂的热脱脂及其模型 被引量:3

THERMAL DEBINDING AND MODEL FOR THE WAX-BASED MIM BINDER OF MULTI-POLYMER COMPONENTS
下载PDF
导出
摘要 采用分步快速脱脂曲线,PW-EVA-HDPE粘结剂有序地分为三步脱除,首先是熔点最低的PW在350℃脱除,然后升温至420℃脱除EVA,最后在500℃脱除HDPE。PW-EVA-HDPE多组元粘结剂热脱脂主要分为初期孔隙通道形成期、孔隙通道形成后剩余PW脱除期及后期剩余EVA和HDPE脱除期。其中孔隙通道形成期和连通孔隙通道形成后剩余PW脱除期的动力学控制因素为液相扩散,即PW的热分解气体Vpw在聚合物熔体中的扩散。 The removal of the PW-EVA-HDPE binder from the as-molded parts is divided intothree steps using step-by-step fast debinding curve. PW with the lowest melting point is removed at350 ℃ , EVA at 420 ℃ and HDPE at 500 ℃ . The thermal debinding of the PW-EVA-HDPE bindercould be divided into three stages. The first is the initial pore structure formation stage, the second is theremoval stage of remianed PW after the formation of pore structure, and the third is the last removal stageof remained EVA and HDPE. The kinetics of rate controlling for the first and second stage is the liquiddiffusion, i.e. the diffusion of Vpw (pyrolytic gas of the paraffin wax) in the polymer melt.
出处 《金属学报》 SCIE EI CAS CSCD 北大核心 1999年第2期167-171,共5页 Acta Metallurgica Sinica
基金 国家863计划!715-009-0090
关键词 粘结剂 热脱脂 注射成形 PW-EVA-HDPE 粉末冶金 binder, thermal debinding, model
  • 引文网络
  • 相关文献

参考文献10

  • 1李益民 曲选辉 等.-[J].粉末冶金材料科学与工程,1998,3(1):26-26.
  • 2李益民 黄伯云 等.-[J].材料研究学报,1998,.
  • 3李益民 曲选辉 等.-[J].粉末冶金技术,1998,16(1):12-12.
  • 4李益民,材料研究学报,1998年,12卷
  • 5李益民,粉末冶金材料科学与工程,1998年,3卷,1期,26页
  • 6李益民,曲选辉,邱光汉,颜寒松,毛金英,黄伯云.PW-EVA-SA金属注射成形粘结剂流变性能和热解行为的研究[J].粉末冶金技术,1998,16(1):12-16. 被引量:1
  • 7李洲,液-液萃取过程及设备,1993年,98页
  • 8Angermann H H,J Mater Sci,1992年,27卷,2534页
  • 9Grman R M,Cemm Bull,1991年,70卷,8期,1294页
  • 10Liu C Y,Acta Metall,1986年,34卷,159页

二级参考文献1

同被引文献18

引证文献3

二级引证文献5

;
使用帮助 返回顶部