期刊文献+

建筑用热轧钢筋的性能升级与使用功能化探讨 被引量:8

Research and Discussion on Upgrading Properties and Functionalization of Hot Rolled Bars for Buildings
原文传递
导出
摘要 阐述了中国建筑钢筋性能升级与使用功能化的重要意义,指出建筑钢筋的性能升级与使用功能化应该走节约型的道路。概述了国内外建筑用热轧带肋钢筋降低生产成本、提高强度、提高使用寿命和使用安全性的发展趋势。分析讨论了目前中国建筑钢筋研究开发、生产应用等方面存在的问题,如:性能低、资源、能源消耗过高、功能性钢筋研究和应用方面落后、标准体系还不完善等。并且提出了促进中国建筑钢筋升级换代的措施与建议。 The importance of upgrading properties and functionalization of hot rolled ribbed bars for buildings in China was introduced in this paper.Upgrading properties and functionalization of hot rolled ribbed bars for buildings should be carried out by means of economical method.Developing trend of reducing production cost,increasing strength,life and safety of hot rolled bars for buildings at home and abroad were described.The problem,such as low property,high cost of energy and resources,backward study and application of functionalization ribbed bars,lack of standard systems,were discussed on research,exploitation,production and application of hot rolled ribbed bars for buildings.Some measures and suggestion of promoting change of dynasty of hot rolled ribbed bars for buildings were put forward.
出处 《中国冶金》 CAS 2011年第2期5-10,共6页 China Metallurgy
基金 国家科技支撑计划课题(2007BAE30B02)
关键词 钢筋 性能 强度 功能化 ribbed bars property strength functionalization
  • 引文网络
  • 相关文献

参考文献13

二级参考文献13

  • 1单麟天.国外钢筋的生产状况、供需关系及价格[J].钢铁钒钛,1995,16(2):60-69. 被引量:2
  • 2[1]Yada H, Matsumura Y. In: Tamura I ed., Proc Int Conf Physical Metallurgy of Thermomechanical Processing of Steel and Other Materials, Tokyo: Iron and Steel Institute of Japan, 1988:200
  • 3[3]Mintz B, Abu-Shosha R, Shaker M. Mater Sci Technol,1993; 9:907
  • 4[5]Mintz B, Lewis J, Jonas J J. Mater Sci Technol, 1997; 13:379
  • 5[6]Yada H, Li C M, Yamagata H. ISIJ Int, 2000; 40:200
  • 6Yangzeng Zheng. Achieving Grain Refinement Through Recrystallization Controlled Rolling and Controlled Cooling in V-Ti-N Microalloyed Steels. HSLA Steels Technology & Applications, 1983, Pennsylvania, USA, ASM, 85- 94.
  • 7L J. The Effect of Microalloy Concentration on the Recrystallization of Austenite During Hot Deformation. Thermomechanical Processing of Microalloyed Austenite, TMS of AIME, Pennsylvania, USA, 1981,129-140.
  • 8GB50010-2002.混凝土结构设计规范.,2002.
  • 9GB1499-1998.钢筋混凝土用热轧带肋钢筋,1999.
  • 10邵莲芬,李勇.配500 MPa钢筋折线先张法预应力混凝土梁受力性能分析[J].河南科学,2008,26(7):805-809. 被引量:2

共引文献84

同被引文献71

  • 1LI LanQiang1,DONG ShiGang1,WANG Wei2,HU RongGang1,DU RongGui1,LIN ChangJian1,ZHUO XiangDong1 & WANG Jia2 1 State Key Laboratory of Physical Chemistry of Solid Surfaces,Department of Chemistry,College of Chemistry and Chemical Engineering,Xiamen University,Xiamen 361005,China,2 College of Chemistry and Chemical Engineering,Ocean University of China,Qingdao 266100,China.Study on interaction between macrocell and microcell in the early corrosion process of reinforcing steel in concrete[J].Science China(Technological Sciences),2010,53(5):1285-1289. 被引量:3
  • 2陈思联,林军,戴观文.晶内铁素体型高强韧性微合金非调质钢的进展[J].特殊钢,2005,26(3):35-38. 被引量:19
  • 3完卫国,赵明琦,张若蔷.钒氮微合金化HRB400钢筋的试制[J].炼钢,2005,21(3):9-13. 被引量:8
  • 4陈立勇,柴建铭,袁永文,刘晓东,韩继玲.BHRB600热轧高强韧树脂锚杆钢筋的开发[J].轧钢,2007,24(4):66-69. 被引量:16
  • 5干勇.中国材料工程大典(第2卷):钢铁材料工程(上)[M].北京:化学工业出版社,2005:413.
  • 6杨忠民.细晶高强钢筋[C]//2009全国建筑钢筋生产、设计与应用技术交流研讨会会议文集,2009.
  • 7Ahmet Kaynar, Suleyman Gundu, Mustafa Turkmen. Investigation on the behaviour of medium carbon and vanadium microal- loyed steels by hot forging test[J]. Materials and Design,2013,51:819-825.
  • 8Show B K, Veerababu R, Balamuralikrishnan R, et al. Effect of vanadium and titanium modification on the microstructure and mechanical properties of a mieroalloyed HSLA steel [ J ]. Mater Sci Eng A ,2010,527 : 1595-1604.
  • 9Kamatsu S A, Senuma T, Hasebe M. Generalized Nb ( C, N) precipitation model applicable to extra low carbon steel [ J ]. ISLI In- ternational, 1992,32(3) :275-282.
  • 10Chen Jun, Tang Shuai, Liu Zhenyu, et al. Straln-induced precipitation kinetics of Nb (C, N) and precipitates evolution in austen- ite of Nb-Ti micro-alloyed steels[ J]. Journal of Materials Science, 2012,47 (11 ) :4640-4648.

引证文献8

二级引证文献11

;
使用帮助 返回顶部