期刊文献+

Integral inference method for da/dN-ΔK and P-da/dN-ΔK curves

Integral inference method for da/dN-ΔK and P-da/dN-ΔK curves
原文传递
导出
摘要 The integral inference method for fatigue crack growth(FCG) curve was established based on the two-variance regression theory.The estimates of da/dN-ΔK curve and P-da/dN-ΔK curve with high confidence level and high survival probability were also given.FCG data scatter with stress intensity factor ranges in reality,which limits the group test method's application.The presented method analyzes FCG curve as an integration,thus it can exploit the lengthwise information among the FCG rates corresponding to different stress intensity factor ranges.Therefore,compared with group test method,the presented method can not only save specimens,but also have higher precision in the evaluations of da/dN-ΔK and P-da/dN-ΔK curves. The integral inference method for fatigue crack growth(FCG) curve was established based on the two-variance regression theory.The estimates of da/dN-ΔK curve and P-da/dN-ΔK curve with high confidence level and high survival probability were also given.FCG data scatter with stress intensity factor ranges in reality,which limits the group test method’s application.The presented method analyzes FCG curve as an integration,thus it can exploit the lengthwise information among the FCG rates corresponding to different stress intensity factor ranges.Therefore,compared with group test method,the presented method can not only save specimens,but also have higher precision in the evaluations of da/dN-ΔK and P-da/dN-ΔK curves.
出处 《航空动力学报》 EI CAS CSCD 北大核心 2011年第6期1251-1256,共6页 Journal of Aerospace Power
关键词 AERO-ENGINE fatigue crack growth(FCG) crack growth rate integral estimate RELIABILITY aero-engine fatigue crack growth (FCG) crack growth rate integral estimate reliability
  • 相关文献

参考文献1

二级参考文献6

  • 1傅惠民.正态分布百分位值和百分率的置信限和容忍限公式[J].航空学报,1994,15(1):94-101. 被引量:40
  • 2Gardiner C W. Handbook of stochastic methods for physics, chemistry and the natural sciences[ M]. New York: Springer-Verlag Berlin Heidelberg, 1983: 373-418.
  • 3Collins J A. Failure of materials in mechanical design, analysis, prediction, prevention[ M ]. New York: John Wiley and Sons Inc., 1981: 360- 500.
  • 4北京航空材料研究院.GB/T6398-2000金属材料疲劳裂纹扩展速率试验方法[S].北京:中国标准出版社,2000:19-24.
  • 5机械工程材料性能数据手册编委会.机械工程材料性能数据手册[M].北京:机械工业出版社,1994.
  • 6傅惠民.逆回归分析和数据融合方法[J].机械强度,2002,24(4):518-523. 被引量:10

共引文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部