期刊文献+

锻造操作机夹钳平行升降机构运动学特性分析 被引量:10

Research on kinematics characteristics of parallel lifting mechanism of forging manipulator tongs
下载PDF
导出
摘要 对锻造操作机机械系统进行运动学特性分析,研究执行机构的运动规律,是实现操作机夹钳末端位置精确控制的前提。本文分析了某典型锻造操作机夹钳平行升降机构的机构特征及运动学特性,得到了夹钳末端随升降缸运动的变化规律以及夹钳平行升降动作的运动学逆解方程。结合锻造操作机具体结构参数对夹钳平行升降逆解近似公式的精度进行了分析,提出了采用高次方程近似公式的方法,并给出了二次方程近似公式,研究结果对于提高操作机夹钳末端的位置控制精度具有一定的理论价值。 To analyze the kinematics characteristics of forging manipulator mechanical system and study the movement rules of each actuator,it is premise to achieve precise control of its position.The mechanism characteristics and kinematics characteristics of tongs lifting mechanisms of forging manipulator are studied.The rules that the position and orientation of tongs following with the actuator are analyzed.The inverse kinematics of tongs lifting mechanism are obtained.With the specific structural parameters of forging manipulator,the accuracy of the extreme approximate formula is analyzed,and the high-order equation approximate formula method is proposed and the quadratic approximation formula is given.The results have certain significance in control piston of for-ging manipulator.
出处 《燕山大学学报》 CAS 2011年第3期198-202,共5页 Journal of Yanshan University
基金 河北省自然科学基金资助项目(E2010001224)
关键词 锻造操作机 夹钳升降机构 运动学特性 forging manipulator tongs lifting mechanism kinematics characteristics
  • 引文网络
  • 相关文献

参考文献3

二级参考文献15

共引文献42

同被引文献89

引证文献10

二级引证文献18

;
使用帮助 返回顶部