期刊文献+

Unipol聚乙烯流化床静电产生及控制方法 被引量:10

The generation and control methods of static electricity in Unipol PE fluidized bed
原文传递
导出
摘要 聚乙烯流化床反应器内静电是产生结片结块的主要原因,通过分析聚乙烯流化床反应器内形成静电的主要因素及原理,提出聚乙烯流化床产生静电的控制方法。 Static electricity is the main reason that causes sheeting or chunk in PE fluidized bed reactor.The static electricity control methods were raised via analysis of the principes and reason in PE reactor.
作者 宋占国
出处 《精细与专用化学品》 CAS 2011年第8期37-41,共5页 Fine and Specialty Chemicals
关键词 静电 结片 流化床 连续性 控制方法 static electricity sheeting fluidized bed continuity control methods
  • 引文网络
  • 相关文献

参考文献11

二级参考文献43

  • 1杨宝柱,王靖岱,阳永荣.乙烯气相聚合反应器中颗粒动力学的研究[J].石油化工,2004,33(12):1130-1132. 被引量:8
  • 2杜仕国.高分子材料的抗静电技术与应用[J].材料导报,1994,8(4):58-61. 被引量:11
  • 3于恒修,王芳,王靖岱,阳永荣.气相聚合流化床内静电与结片现象的研究进展[J].石油化工,2007,36(2):205-209. 被引量:32
  • 4中国石油化工股份有限公司,浙江大学.隔爆型流化床静电检测装置:中国,200710156043[P].2007-10-16.
  • 5浙江大学.一种降低流化床反应器内静电水平的方法:中国.200910153067[P].2009-9-29.
  • 6Higashiyama Y, Castle G S P, ineulet II, et al. The effect of an externally added charge control agent on contact charging between polymers [J].Journal of Electrostatics,1993,30: 203-212.
  • 7Nguyen T, Nieh S. The role of water vapor in the charge elimination process for flowing powders [J]. Journal of Electrostatics,1989,22:213-227.
  • 8Mehrani P,et al.Electrostatic charge generation in gassolid fluidized beds[J].Journal of electrostatics,2005,63:165~173
  • 9Boland D,Geldart D.Electrostatic charging in gas fluidized beds[J].Powder Technol,1971/1972,5:289~297
  • 10Wolny A,Kazmierczak W.The influence of static electrification on dynamics and rheology of fluidized bed[J].Chem Eng Sci,1993,48(20):3 529~3 534

共引文献53

同被引文献49

引证文献10

二级引证文献19

;
使用帮助 返回顶部