期刊文献+

射流型磁场排布方式控制结晶器内液流的实验研究 被引量:5

EXPERIMENTAL STUDY ON FLOW IN SLAB MOLD CONTROLLED BY JET-PATTERN MAGNETIC FIELD
原文传递
导出
摘要 以水银为介质,通过物理模拟实验考察射流型磁场排布方式对中厚板坯连铸结晶器内流场的控制.采用超声波Doppler测速仪测量有,无磁场下的结晶器内液态金幅流速,研究磁场排布和强度对水口出流,结晶器内流动、液面流动、结晶器窄面模壁的冲刷作用等的影响.实验显示,射流型磁场排布方式使水口出流流速受到比通常磁场排布方式更强的抑制作用,使其在撞击结晶器窄壁前发生分散,可使上环流流速增强,下环流减弱直至消失,直接形成活塞流形式;同时,还改善了弯月面处流动情况.相比于工业生产中的全幅一段电磁制动技术,射流型磁体排布方式的电磁制动在水口出流、液面处流动方面具有更强的制动作用. A mercury model was developed to investigate the control of the jet pattern magnetic field on the flow in medium and heavy slab continuous casting mold. The velocities in mold with and without magnetic field was measured by ultrasonic Doppler velocimeter. The influences of the magnetic field on the flow discharged from the nozzle, the flow in the mold, the flow at the meniscus and washing intensity to wall were analyzed and studied. The results showed that the flow discharged from the nozzle is suppressed, and dissipated before impinging against wall, the flow in the upper eddy is strengthened, the flow in the lower eddy is weakened, and the flow at the meniscus is improved by jet-pattern magnetic field. Compared with electromagnetic braking (EMBr) ruler, the brake effect of the the jet-pattern magnetic field on the flow discharged from the nozzle and the flow at the meniscus are the better.
出处 《金属学报》 SCIE EI CAS CSCD 北大核心 2011年第10期1285-1291,共7页 Acta Metallurgica Sinica
基金 国家自然科学基金资助项目50674066~~
关键词 连铸 结晶器 电磁制动 物理模拟 射流型磁场排布方式 continuous casting, mold, electromagnetic braking, physical simulation, jet pattern magnetic field
  • 引文网络
  • 相关文献

参考文献2

二级参考文献2

  • 1Cláudio Geraldo Sch?n,Amilton Sinatora.Hot rolling mill roll microstructure interpretation: A computational thermodynamics study[J].Journal of Phase Equilibria.2001(4)
  • 2Amitava Ray,M. S. Prasad,S. K. Dhua,S. K. Sen,S. Jha.Microstructural features of prematurely failed hot-strip mill work rolls: Some studies in spalling propensity[J].Journal of Materials Engineering and Performance.2000(4)

共引文献6

同被引文献67

引证文献5

二级引证文献15

;
使用帮助 返回顶部