期刊文献+

PEEK树脂PVT特性与加工性能的关系 被引量:2

Relationship of process property of PEEK with PVT
下载PDF
导出
摘要 基于毛细管流变仪对PEEK树脂PVT特性的测试重要性及应用进行了阐述。对比分析了两种不同工艺合成的PEEK工艺上的差别,对两种不同工艺合成的PEEK分别进行了等压模式和等温模式PVT测试,发现在加工过程中,压力对VisPEEK材料性能影响较大。 Two PEEK synthesis techniques were analyzed and compared, and the importance and application for PVT analysis of capillary rheometer was described. Isostatic and isothermal PVT analysis on PEEK were conducted which were synthesized by two different techniques. It can be concluded that pressure had a great effect on the properties of Vis- PEEK materials in the manufacturing process.
出处 《化工新型材料》 CAS CSCD 北大核心 2012年第7期67-69,共3页 New Chemical Materials
关键词 PEEK 毛细管流变仪 PVT特性 材料加工 PEEK(poly ether ether ketone), capillary rheometer, pressure-volume-temperature relationship, materi-al processing
  • 引文网络
  • 相关文献

参考文献6

二级参考文献71

共引文献45

同被引文献18

  • 1Forstner R,Peters G W M, Meijer H E H. A novel dilatometer for PVT measurements of polymers at high cooling and shear rates [ J ]. International Polymer Processing ,2009,24 ( 2 ) : 114 - 121.
  • 2Yoshiyuki S, Yoshiteru Y, Shigeki T, et al. Precise measurement of the PVT of polypropylene and polycarbonate up to 330 C and 200 MPa[J]. Journal of Applied Science, 1997,66 : 141 - 150.
  • 3Chakravorty S. P-V-T testing of polymers under industrial processing conditions[ J]. Polymer Testing,2002,21 : 313 - 317.
  • 4Zuidema H, Peters G W M, Meijer H E H. Influence of cooling rate on P-V-T-data of semi-crystalline polymers [ J ]. Journal of Applied Polymer Science ,2001,82 : 1170 - 1186.
  • 5Luyo J F, Regnie G, Le Bot P H, Delaunay D, Fulchiron R. PVT measurement methodology for semicrystalline polymers to simulate injection-molding process [ J ]. Journal of Applied Polymer Science, 2001,79:302 - 311.
  • 6Ding Z, Spruiell J E. An experimental method for studying nonisothermal crystallization of polymers at very high cooling rates [ J ]. Journal of Polymer Science, 1996,34:2783 - 2804.
  • 7Leute U, Dollhopf W, Liska E. Dilatometric measurements on some polymers :the pressure dependence of thermal properties [ J ]. Colloid and Polymer Science, 1976,254:237 - 246.
  • 8Zoller P, Fakhreddine Y A. Pressure-volume-temperature studies of semicry stalline [ J ]. Polymers Thernmchimica Acta, 1994,238:397 - 415.
  • 9Giordano M, Russo M, Capoluongo P, et al. The effect of cooling rate on the glass transition of an amorphous polymer[ J ]. Journal of Non- Crystalline Solids, 2005,35 ( 1 ) : 515 - 522.
  • 10Van der Beek M H E,Peters G W M,Meijer H E H. The influence of cooling rate on the specific volume of isotactic poly (propylene) at elevated pressures [ J ]. Maeromolecular Materials and Engineering, 2005,290:443 - 455.

引证文献2

二级引证文献6

;
使用帮助 返回顶部