期刊文献+

高精度贴片机贴片元件位置校正算法研究 被引量:4

The Research on SMD Positional Correction Algorithm of High-precision Chip Mounter
下载PDF
导出
摘要 由于制造和安装误差使得贴片机的贴装头以及吸嘴部件难以垂直于XY贴装平面。当校正贴片元件的角度时,其中心位置也同时发生变化,从而会严重影响最终的贴装精度。基于贴片元件的角度校正包括吸嘴本身的自转运动和吸嘴围绕吸嘴旋转轴心的公转运动这一事实,提出一种基于图像识别和圆拟合的校正算法。通过计算机仿真和工程实践应用证明,该算法可以满足高精度贴片机贴装位置精度的要求。 The placement head and nozzle component in chip mounter are not perpendicular to XY plane ideally because of manufacture and assemble errors. When correcting the angle of chip component, the position of chip component changes synchronously, that will affecting the final mount accuracy badly. A correcting algorithm based on image recognition and circle fitting is proposed based on the fact that the angle correction of chip component ineludes the rotational motion of nozzle on its own axis and the rotational motion that nozzle moves round the rotational axis of nozzle. Through computer simulation and the application of engineering practice, it has proved that this algorithm achieved the positional accuracy requirements of high -precision chip mounter.
出处 《广东轻工职业技术学院学报》 2012年第2期6-10,共5页 Journal of Guangdong Industry Polytechnic
基金 广东省-教育部产学研项目(2011B090400577) 企业横向课题(2010172)
关键词 高精度贴片机 位置校正算法 贴片元件 图像识别 圆拟合 high -precision chip mounter positional correction algorithm surface mounting device image recog-nition circle fitting
  • 引文网络
  • 相关文献

参考文献3

二级参考文献12

  • 1Burel G. Vision feedback for SMD Placement using neural network[J]. IEEE International Conference on Robotics and Automation,1995,2:1491~1496.
  • 2Decario J M. A comparison of alignment and placement method for fine pitch component[J]. IEEE Transactions on Packing andManufacturing Technology, 1996,20: 2135 ~ 2140.
  • 3Lecarpentier G, et al. High accuracy machine automated assembly for opto electronics [C]//Electronic Components and Technology Conference. America:IEEE, 2000.
  • 4Gander W ,Golub G H, Strebel R, et al. Least-squares fitting of circles and ellipses [ J ]. BIT Numerical Mathematics, 1994,34 (4) :558 -578
  • 5Rosin P L. Ellipse fitting by accumulating five-point fits [ J ]. Pattern Recognition Letters, 1993,14 ( 8 ) :661 - 669
  • 6Forbes A B. Least-squares best fit geometric elements[ C]//Algorithms for Approximation II. London: Chapman and Hall, 1990:311 -319
  • 7Fischler M A, Bolles R C. Random sample consensus: a paradigm for model fitting with applications to image analysis and automated cartography[J].Communications of the ACM, 1981,24 (6) :381 -395
  • 8侯成刚,赵明涛,屈梁生.基于二次曲面拟合的亚象素图象匹配算法[J].计量学报,1997,18(3):227-231. 被引量:12
  • 9周志强,陈哲.贝叶斯景象匹配技术[J].北京航空航天大学学报,1999,25(3):337-341. 被引量:5
  • 10栾新,朱铁一.快速搜索任意形状二维目标质心策略[J].中国图象图形学报(A辑),1999,4(5):372-376. 被引量:5

共引文献211

同被引文献31

引证文献4

二级引证文献1

;
使用帮助 返回顶部