期刊文献+

带钢剪切断面层次分布对剪切工艺影响探究 被引量:3

The Study of Strip Shearing Section Level Distribution of Shearing Process
下载PDF
导出
摘要 针对国内钢铁企业在使用圆盘剪切机进行剪切薄板带钢时,普遍出现断面毛刺的现象,通过理论分析结合有限元仿真,建立了剪切系统的三维模型,赋予实际作业工况,探求剪刃重合度、间隙剪等切工艺参数与剪切断面层次分布的关系。并以理论力学、材料力学、弹塑性力学的相关知识为基础,分析得出"取点分层法"。最后通过"取点分层法"得到了重合度、间隙与带钢剪切断面层次比例的关系以及对剪切工艺的影响因素,最终通过与经典剪切理论的对比,验证了仿真结果的正确性。 In, view of the generally phenomenon of section burr in the use of disk shearing machine far shearing plate .~trip with domestic iron and steel enterprises,thro,gh using the theory analysis combined with finite element software simulation tools in article ,a shear system model on the simplified principle with condition of the actual operating is established,exploring the relationship between cutting edge coincidence degree ,gap shear process parameters and the level of distribution of shearing section.A nd with theoretical mechanics,material mechanics,the elastic-plastic mechanics knowledge as the foundation,the method of taking hierarchical is got.A nd through the "taking hierarchical method"the relationship of the coincidence degree ,clearance and strip shearing section level proportion as well as on the factors on shear technology is got.Finally using the theoretical knowledge demonstrates the accuracy of simulation results.
出处 《机械设计与制造》 北大核心 2012年第10期108-110,共3页 Machinery Design & Manufacture
关键词 断面 毛刺 层次分布 间隙 重合度 Section Burr Level Distribution Clearance Coincidence Degree
  • 引文网络
  • 相关文献

参考文献6

二级参考文献23

  • 1姜勇,罗艳红,范泽夫,王霞瑜,徐军,郭宝华,李林.Observation of banded spherulites and lamellar structures by atomic force microscopy[J].Science China Chemistry,2003,46(2):152-159. 被引量:1
  • 2陈士华.连铸板坯低倍组织缺陷研究[M].武汉钢铁公司,1994,12..
  • 3徐海光.连铸板坯中心裂纹缺陷对钢板质量影响的研究[M].昆明钢铁公司,1996,5..
  • 4邹家祥.轧钢机械[M].北京:冶金工业出版社,2006.
  • 5大久保博之等.带钢热连轧机中滚筒式飞剪剪切机理的研究.重型机械,1980,(10):22-31.
  • 6Cockcroft M G,Latham D J.Ductility and the workability of metals[J].J Inst Metals,1968,96:33-39.
  • 7邹家祥.冶金机械设计理论[M].北京:冶金工业出版社,1988.
  • 8Delmonte J. Metal/polymer Composites [M]. New York: Van Nostrand Reinhold, 1990. 143 - 160.
  • 9Karlsson K F, Astron B T. Manufacturing and applications of structural sandwich components [J]. Composites, 1997, 28A(2).. 97- 111.
  • 10Slaven J, Marks M. A stressed skin sandwich construction for the automotive industry[J]. SAE Trans,1998, 107: 914-930.

共引文献38

同被引文献26

引证文献3

二级引证文献4

;
使用帮助 返回顶部