期刊文献+

渗透检测中渗透液的润湿现象与接触角 被引量:8

The Wetting Phenomena and Contact Angle in Penetrant Test
下载PDF
导出
摘要 作为渗透检测中的润湿现象有三种方式:即粘湿、浸湿和铺展。若渗透液在固体受检试件表面上的接触角θ≤180°,则可发生粘湿;若接触角θ≤90°,则可发生浸湿;若接触角θ≈0°,则可发生铺展。凡能铺展者,必能浸湿,更能沾湿。渗透检测要求铺展。接触角θ的大小是由在气、液、固三种界面张力的大小所决定的。从接触角θ数值大小可看出液体对固体润湿的程度。这些讨论有助于对渗透检测中实际问题的认识。 There are three methods as wetting phenomena in penetrant testing: adhesion wetting, immersion wetting, spreading. The adhesion wetting will occur on the condition that the contact angle 0 on the surface of the specimen is less than or equal to 180°. If 0 is less than or equal to 90°, immersion wetting will happen. Spreading occurs when 0-0°. The requirement of spreading is the highest; immersion wetting is in the middle; the adhesion wetting comes to the last. Penetrant testing needs spreading. The contact angle 0 is determined by the interracial tension of gas, liquid and solid. The degree of wetting can be known by the value of 0. These discussions will help to understand the practical problem of the Penetrant testing.
出处 《无损检测》 2013年第3期70-73,共4页 Nondestructive Testing
关键词 润湿 润湿方式 润湿方程 Wetting Wet method Wetting equation
  • 相关文献

参考文献1

  • 1胡学知.渗透检测[M].北京:中国劳动社会保障出版社,2007.

共引文献25

同被引文献149

引证文献8

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部