期刊文献+

以Al_2O_3为载体的Ni-Cu双金属催化剂催化3-羟基丙醛加氢 被引量:1

Hydrogenation of 3-hydroxypropanal on Ni-Cu/Al_2O_3 Catalyst
下载PDF
导出
摘要 采用浸渍法制备了Ni-Cu/Al2O3双金属催化剂。运用XRD、H2-TPR手段对催化剂进行表征,并将其应用于3-羟基丙醛(HPA)加氢反应。结果表明,在所考察条件下,Cu具有较低的加氢活性。但当其作为Ni助剂存在时,可以使NiO的还原温度显著降低,催化剂经低温还原便表现出优异的加氢活性。经350℃还原的催化剂,在反应温度60℃,压力5 MPa,催化剂用量100 mL,进料量2 mL/min条件下,3-羟基丙醛转化率达到98%。 Ni -Cu/Al2O3 catalyst is prepared by introducing Cu to Ni/Al2O3. The catalysts are characterized by XRD, TPR. Also, their catalytic activities are measured by hydrogenation of 3 - hydroxypropanal (HPA). The result shows that under the investigated conditions, Cu has a lower hydrogenation activity. But Cu can make the NiO reduction temperature decreased significantly. The Ni - Cu/Al2O3 catalyst exhibits excellent hydrogenation activity through the low temperature reduction. When the catalyst is reduced at 350℃ ,the conversion of HPA is 98% under the hydrogenation conditions as the reaction temperature 60℃ ,the reaction pressure 5 Mpa,amount of catalyst 100 mL,raw material feed rate 2 mL/min.
作者 胡叶林 赵毅
出处 《河南化工》 CAS 2013年第7期39-41,共3页 Henan Chemical Industry
关键词 Ni—Cu AL2O3 3-羟基丙醛 加氢 1 3-丙二醇 Ni - Cu,/Al2O3 3 - hydroxypropanal hydrogenation 1,3 - propanediol
  • 相关文献

参考文献6

二级参考文献28

  • 1Thomas H, Bemd J, US[P] , 6,297,408, 2001.
  • 2Thomas H, Bernd J, Willi H, et al. US [ P ] , 6, 342, 646, 2002.
  • 3Knifton J F, James T G, Slaugh L H, et al. US[P], 6, 750, 373, 2004.
  • 4Li Bing-lu(李秉鲁),Zhang Yin-zhu(张银珠),Cao Heng-shou(曹亨受),et al.CN(中国专利)[P]1412171,2003.
  • 5Forshcer T C, Weider P R, Slaugh L H, et al. US[P] , 6, 191, 321, 2001.
  • 6Chen Jin(陈静),Cui Fang(崔芳),Liu Jian-hua(刘建华),et al.CN(中国专利)[P]101020635,2006.
  • 7Seddon K R. J. Chem. Biotechnol[ J] , 1997, 68: 351- 356.
  • 8Welton T. Chem. Rev. [J], 1999, 99:2 071-2 083.
  • 9Olivier H. J. Mol. Catal. A: Chem. [J], 1999, 146 : 285 - 289.
  • 10Huddleston J G, Visser A E, Reichert W M, et al. Green Chem. [J], 2001,3(4) : 156 - 164.

共引文献8

同被引文献15

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部