微注塑制品微观形态及性能最新研究进展
Recent research progress in micro morphology and resultant properties of microinjection molded parts
摘要
微注塑(μIM)被认为是最具灵活性、可靠性以及成本优势的聚合物微/纳器件制造技术之一。因尺寸效应影响,μIM过程中熔体流场明显不同于普通注塑过程,进而产生特殊的制品微观形态及其性能。本文分别从纯聚合物材料与聚合物复合材料两方面综述了μIM制品微观形态及其性能的最新研究进展。最后,对该领域未来的发展方向进行了预测。
出处
《橡塑技术与装备》
CAS
2013年第6期21-25,共5页
China Rubber/Plastics Technology and Equipment
参考文献40
-
1Choi S 3, Kim S K 2011 Multi-scale filling simulation of micro-injection molding process J. Mech. Sci. Yechnol. 25 117-24.
-
2Mavridis H, Hrymak A N and Vlachopoulos J 1986 Finite element simulation of fountain flow in injection molding Polym. Eng. Sci. 26 449-54.
-
3Chu J-S, Kamal M R, Derdouri A and Hrymak A 2012 Morphology development in the gate region of microinjection-molded thermoplastics Polym. Eng. Sci. 52 787-94.
-
4Liu F, Guo C, Wu X, Qian X, Liu H and Zhang J 2012 Morphological comparison ofisotactic polypropylcnc parts prepared by micro-injection molding and conventional injection molding Polym. Adv. Technol. 23 686-94.
-
5Viana J C 2004 Development of the skin layer in injection moulding: phenomenological model Polymer 45 993-1005.
-
6Nguyen-Chung T, L6ser C, Jtittner G, Pham T, Obadal M and Gehde M 2011 Simulation of the micro- injection moulding process: effect of the thermo- theological status on the morphology Proc. IMechE Part E: J. Process Mech. Eng. 225 224-38.
-
7Yamazaki S, Watanabe K, Okada K, Yamada K, Tagashira K, Toda A and Hikosaka M 2005 Formation mechanism of shish in the oriented melt (1)-bundle nucleus becomes to shish Polymer 46 1675-84.
-
8lto 14, Yagisawa Y, Saito T, Yasuhara T, Kikutani T and Yamagiwa Y 2005 Fundamental study on structure development of thin-wall injection molded products Theor. Appl. Mech. Jpn. 54 263-8.
-
9Chu J, Hrymak A and Kamal M R 2007 Microstructural characteristics of micro-injection molded thermoplastics Proc. Annual Technical Conf., (ANTEC 2007), (6-11 May 2007) pp 1973-7.
-
10Stern C, Frick A R, Weickert G, Michler G H and Henning S 2005 Processing, morphology, and mechanical properties of liquid pool polypropylene with different molecular weights Macromol. Mater. Eng. 290 621-35.
-
1陈晋南,彭涛.聚合物挤出口模设计的数值研究进展[J].中国塑料,2010,24(3):19-24. 被引量：2
-
2刘成凯,纪箴,周卫华.苯乙烯-马来酸酐共聚物的合成[J].北京服装学院学报（自然科学版）,1997,17(2):13-19. 被引量：7
-
3丁琳,张萍,赵树高.充油溶聚丁苯橡胶的结构与性能[J].橡胶工业,2011,58(8):471-478. 被引量：3
-
4黄汉雄,彭玉成.HDPE熔体连续挤出自增强的研究 (Ⅱ) 自增强试样横截面上性能的不均匀性[J].高分子材料科学与工程,1999,15(4):162-163. 被引量：4
-
5曹利锋,邹树梁,唐德文,刘永霞.空气和液压油环境中几种耐油橡胶材料γ辐射效应研究[J].特种橡胶制品,2014,35(5):10-12.
-
6安琪.各国轮胎制造商纷纷上调轮胎价格[J].橡胶科技市场,2010,8(3):27-27.
-
7陈学锋,徐言生,胡建国,许中明,殷小春.聚合物熔体二维非等温脉动流场模型[J].塑料,2015,44(2):85-88. 被引量：3
-
8超声波下乳液聚合法制备导电聚苯胺的方法[J].工程塑料应用,2008,36(12):82-82.
-
9邓小珍,柳和生,黄兴元,黄益宾,万齐访.气体辅助工艺对曲线型异型材共挤成型的影响[J].高分子材料科学与工程,2015,31(11):119-123. 被引量：2
-
10孙大鹏,朱向哲,程志飞,王阁.同步转子密炼机混合效率的数值模拟研究[J].工程塑料应用,2012,40(10):33-37. 被引量：13
