期刊文献+

中厚板生产中镰刀弯的成因及控制措施 被引量:6

CAUSES AND CONTROL MEASURES OF CAMBER IN THE PRODUCTION OF MEDIUM PLATE
下载PDF
导出
摘要 针对邯钢中板厂3500 mm生产线轧制过程中产生镰刀弯的原因进行分析,并结合实际给出解决措施,减少和避免了镰刀弯的产生,提高了3500 mm生产线的综合成材率。 According to 3500 mm plate mill of Handan Iron and Steel Company, the paper analyzed the causes of camber in the production of medium plate. Some practical solutions were offered to reduce and avoid the camber of the 3500 mm production line. It improved the comprehensive utilization rate at the same time.
出处 《河南冶金》 2013年第5期48-50,共3页 Henan Metallurgy
关键词 中厚板 镰刀弯 厚度不均 温度不均 轧机 medium plate camber uneven thickness uneven temperature rolling mill
  • 引文网络
  • 相关文献

参考文献3

二级参考文献11

  • 1王国栋,刘相华,王君.我国中厚板生产技术进步20年[J].轧钢,2004,21(6):5-9. 被引量:23
  • 2胡贤磊,矫志杰,赵忠,何纯玉,阎智平,陈波.MAS平面形状控制方法的在线应用[J].轧钢,2005,22(6):6-8. 被引量:4
  • 3胡贤磊,赵忠,刘相华,王国栋,阎智平.中厚钢板侧弯的形成原因分析[J].钢铁,2006,41(4):56-61. 被引量:24
  • 4Ohmori K, Inoue M, Miyake T, et al. Development of camber control techniques in plate rolling[J]. Tetsu-To-Hagane, 1986,72(12):2248-2255.
  • 5Nakajima K, Asamura T, Kikuma T, et al. Hot strip crown control by six-high mill[J]. Transactions of ISIJ, 1984,24(4):284-291.
  • 6小川茂,松本纮美,浜渦修一, ほか. 熱间压延における板クラゥン予测式[J]. 塑性と加工, 1984,25(11):1034-1041.
  • 7Ohmori K, Isoyama S,Inoue M, et al. Analysis of camber mechanism in plate rollingdevelopment of camber control system in plate rolling Ⅰ[J]. Transactions of ISIJ, 1985,26(2):61.
  • 8Nishizaki K, Tezuka S, Fukutaka Y, et al. Development of camber-meter at heavy plate mill linedevelopment of camber control system in plate rolling Ⅱ[J]. Transactions of ISIJ, 1985,26(2):62.
  • 9Miyake T, Inoue M, Ohmori K, et al. Camber control in plate rollingdevelopment of camber control system in plate rolling Ⅲ[J]. Transactions of ISIJ, 1985,26(2):63.
  • 10Tanaka Y, Omori K, Miyake T, et al. Camber control techniques in plate rolling[J]. Kawasaki Steel Technical Report, 1987,16(6):12-20.

共引文献35

同被引文献35

引证文献6

二级引证文献8

;
使用帮助 返回顶部