期刊文献+

压痕法表征韧性膜力学性能的量纲分析 被引量:1

Dimensional analysis of characterizating mechanical properties of ductile films by the indentation method
下载PDF
导出
摘要 通过对韧性膜/韧性基底体系的Berkovich压入过程进行量纲分析,得到了压入法的加卸载参数和韧性膜/基底的力学参数之间的无量纲函数关系,为建立压痕法表征韧性薄膜力学性能的模型奠定基础. A dimensional analysis was carried out about the process of Berkovich-indentation on a ductile film/substrate system. The corresponding dimensionless relationship between the loading/unloading parameters and the mechanical parameters of ductile film/substrate was obtained. This lays the foundation for the establishment of the model which can characterize the mechanical properties of ductile thin films by the indentation method.
出处 《材料研究与应用》 CAS 2013年第4期235-237,267,共4页 Materials Research and Application
基金 湖南省教育厅项目(11C1104) 衡阳市科技局项目(2011KJ75)
关键词 韧性膜 韧性基底体系 量纲分析 加卸载参数 ductile film/ductile substrate system dimensional analysis loading-unloading parameters
  • 相关文献

参考文献9

  • 1BLECH A I. Electromigration in thin aluminum films on titanium nitride[J]. J Appl Phy, 1976,47(4): 1203.
  • 2ARZT E, NIX W D. A model for the effect of line width and mechanical strength on electromigration failure of in- tercomnects with "near-bamboo" grain structures[J]. J Mater Res, 1991,6(4) : 731.
  • 3HARDWICH D A. The mechanical properties of thin films.. A Review [J]. Thin Solid Films, 1987, 154(1/ 2):109-124.
  • 4杨桂通.弹塑性力学[M].北京:高等教育出版社,1987:2-3.
  • 5廖艳果,胡和平,周益春.能量法表征硅基底上韧性薄膜的塑性性能[J].材料研究与应用,2010,4(1):44-47. 被引量:8
  • 6胡和平,廖艳果,周益春.韧性薄膜/基底体系锥形压痕的有限元分析[J].南华大学学报(自然科学版),2009,23(4):56-61. 被引量:4
  • 7LIAO Y G, ZHOU Y C, HUANG Y L, et al. Measur- ing elastic-plastic properties of thin films on elastic-plas- tic substrates by sharp indentation [J]. Mech Mat, 2009,41(3) :308-318.
  • 8廖艳果,胡和平,周益春.加工硬化对薄膜/基底体系临界压痕极限的影响[J].湘潭大学自然科学学报,2011,33(2):17-21. 被引量:7
  • 9PELEGRI A A, HUANG X. Nanoindentation on soft film/hard substrate and hardfilm/soft substrate material systems with finite element analysis [J]. Compos Sci Technol, 2008,68 (1) : 147-155.

二级参考文献29

  • 1ARZT E, NIX W D. A model for the effect of line width and mechanical strength on electromigration failure of intereomneets with "near-bamboo" grain structures [J]. Journal of Materials Research, 1991,6(4):731-736.
  • 2HARDWICH D A. The mechanical properties of thin films: A Reviwer[J]. Thin Solid Films, 1987,154 ( 1-2 ) : 109-124.
  • 3MA D,XU K. HE j,et al. Evaluation of the mechanical properties of thin metal films[J]. Surface and Coatings Technology, 1999, 116-119(1): 128-132.
  • 4DAO M, CHOLLACOOP N, SURESH S, et al. Computational modeling of the forward and reverse problems in instrumented sharp indentation [J]. Acta Materialia, 2004, 49(19): 3899-3918.
  • 5Liu S B,Wang Q J.Determination of Young's modulus and Poisson's ratio for coatings[J].Surface and Coatings Technology,2007,201(14):6470-6477.
  • 6Tan J,Meadows P J,Zhang D,et al.Yoang's modulus measurements of sic coatings on spherical particles by using nanoindentation[J].Journal of Nuclear Materials,2009,393(1):22-29.
  • 7Gamonpilas C,Busso E P.On the effect of substrate properties on the indentation behaviour of coated systems[J].Materials Science and Engineering A,2004,380(1/2):52-61.
  • 8Panich N,SunY.Effect of penetration depth on indentation response of soft coatings on hard substrates:a finite element analysis[J].Surface and Coatings Technology,2004,182(2/3):342-350.
  • 9Xu Z H,Rowcliffe D.Finite element analysis of substrate effects on indentation behaviour of thin films[J].Thin Solid Films,2004,447-448:399-405.
  • 10Ma D J,Xu K W,He J W,et al.Evaluation of the mechanical properties of thin metal films[J].Surface and Coatings Technology,1999,116-119:128-132.

共引文献8

同被引文献10

  • 1YANG Y T,LIAO J D, LEE Y L,et al. Ultra-thin phospholipid layers physically adsorbed upon glass char-acterized by nano-indentation at the surface contact level[J]. Nanotechnology,2010, 6(14) :195 702.
  • 2SAHA R,NIX W D. Effects of the substrate on the determination of thin film mechanical properties bynanoindentation[J]. Acta Materialia, 2002 ,50(1): 23 -38.
  • 3VLASSAK J,CIAVARELLA M,BARBER J,et al. The indentation modulus of elastically anisotropic mate-rials for indenters of arbitrary shape[J]. Journal of the Mechanics and Physics of Solids, 2003(51) : 1 701 -1721.
  • 4WANG J S. ZHENG X J, ZHENG H,et al. Identification of elastic parameters of transversely isotropic thinfilms by combining nanoindentation and FEM analysis[J3. Computational Materials Science, 2010,49(2):378-385.
  • 5TAO Y W, ZHENG X J, LIU W,et al. Determination of the mechanica Iconstants of ZnS nanobelt by combi-ning Nanoindentation test and finite element method[J], International Journal of Solid sand Structures, 2013,50:487-497.
  • 6LIAO Y G, ZHOU Y C, HUANG Y L*et al. Measuring elastic-plastic properties of thin films on elastic-plastic substrates by sharp indentation [J]. Mech Mat, 2009. 41(3) : 308 - 318.
  • 7DAMJANOVIC D. Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceram-ics [J]. Rep Prog Phys, 1998, 9(61):1 267-1 324.
  • 8廖艳果,胡和平,周益春.能量法表征硅基底上韧性薄膜的塑性性能[J].材料研究与应用,2010,4(1):44-47. 被引量:8
  • 9廖艳果,胡和平,周益春.加工硬化对薄膜/基底体系临界压痕极限的影响[J].湘潭大学自然科学学报,2011,33(2):17-21. 被引量:7
  • 10廖艳果,蒋丽梅,胡和平,王晓锋.韧性薄膜/韧性基底体系弹性模量表征的新方法(英文)[J].湘潭大学自然科学学报,2013,35(2):20-25. 被引量:1

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部