期刊文献+

Thermal Scratch on Surface of SUS430 Stainless Steel Strip in Cold Rolling Process 被引量:5

Thermal Scratch on Surface of SUS430 Stainless Steel Strip in Cold Rolling Process
原文传递
导出
摘要 The thermal scratch significantly influences the surface quality of the stainless steel in cold strip rolling. The thermal scratch has a close relation to the rolling parameters, the rolls surface and the emulsions used in rolling. In order to explain the thermal scratch on the strip surface, the cold roiling process of SUS430 stainless steel strip was investigated in the laboratory. The thermal scratch defect occurs frequently in the second rolling pass (maximum reduction in height is 32.3 ~), especially on the lower surface of strips. When concentration and temperature of the emulsion are the same, the thermal scratch on the surface o{ the strip is aggravated with increasing the roll surface roughness. With the same roll surface roughness and emulsion concentration, the thermal scratch is obviously more severe at an emulsion temperature of 63 ℃ than 55 ℃. With the same roll surface roughness and emulsion tempera- ture, the thermal scratch is distinctly weaker at the emulsion concentration of 6 % than that of 3 %. The thermal scratch significantly influences the surface quality of the stainless steel in cold strip rolling. The thermal scratch has a close relation to the rolling parameters, the rolls surface and the emulsions used in rolling. In order to explain the thermal scratch on the strip surface, the cold roiling process of SUS430 stainless steel strip was investigated in the laboratory. The thermal scratch defect occurs frequently in the second rolling pass (maximum reduction in height is 32.3 ~), especially on the lower surface of strips. When concentration and temperature of the emulsion are the same, the thermal scratch on the surface o{ the strip is aggravated with increasing the roll surface roughness. With the same roll surface roughness and emulsion concentration, the thermal scratch is obviously more severe at an emulsion temperature of 63 ℃ than 55 ℃. With the same roll surface roughness and emulsion tempera- ture, the thermal scratch is distinctly weaker at the emulsion concentration of 6 % than that of 3 %.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2014年第3期282-286,共5页
基金 Sponsored by National Natural Science Foundation of China(51174057,51274062) National High-technology Researchand Development Program of China(2012AA03A503)
关键词 stainless steel thermal scratch EMULSION roll surface roughness stainless steel thermal scratch emulsion roll surface roughness
  • 相关文献

参考文献11

  • 1W. Wang, M. Hua, X. Wei, Wear 271 (2011) 1166-1173.
  • 2G. Subhash, W. Zhang, Wear 252 (2002) 123 -134.
  • 3V. Vitry, F. Delaunois, G. Dumortier, Surf. Coat. TechnoI. 202 (2008) 3316-3324.
  • 4D.R. Petersen, R.F. EFHajjar, lB. A. Kabor, Eng. Fract. Mech. 90 (2012) 30-40.
  • 5N. Saito, Y. Hemmi, T. Arima, M. Oishi, M. Hosokawa, Wear 201 (1996) 145 -154.
  • 6S. K, Varma, R. R. Romero, Wear 201 (1996) 121-131.
  • 7D. H. Kim, B. M. Kim, Y. Lee, J. Mater. Process. Technol. 139 (2003) 414-421.
  • 8Z. H. Bai, A.M. Wu, J. F. Wang, X.D. Li, F.P. Chen, J. Iron Steel Res. 18 (2006) No. 1, 20-23.
  • 9G.J. Qiu, J. Sun, Z. H. Bai, Metallurgical Equipment (2007) No. 3, 23-26.
  • 10W. J. Jin, T. H. Ren, Lubricating Oil 26 (2011) No. 3, 56-61.

同被引文献47

引证文献5

二级引证文献44

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部