期刊文献+

套管变形的复合力学模型 被引量:22

COUPLING MECHANICS MODEL OF CASING DEFORMATION
下载PDF
导出
摘要 根据大庆油田采油一厂萨中西区套管变形的研究结果 ,提出了应力—压力复合力学模型。该模型很好的解释了该区的套管变形发生原因。高、低压力区沿最大水平主应力方向分布时 ,发生套管变形的临界压差为0 .76 7MPa。高、低压力区沿其它方向分布时 ,发生套管变形的临界压差为 1.0 8MPa。优势套管压缩方向为北西西向。套变区分布在压力梯度较大的位置。上述分析与多年的实际观测结果有较好的一致性。 Acoording to the research results of casing deformation at west region of Sazhong in No.1 Oil Production Department of Daqing Oilfield,we firstly present the stress pressure coupling mechanics model.This model perfectly explains the causes of casing deformation in this region.The critical pressure difference is 0 767MPa when the high and low pressure zones distribute along the direction of maximum principal stress.However,when the high and low pressure zones distribute along the other directions,the critical pressure difference is 1.08MPa.The preferred orientation of casing compression is NWW.The casing deformation is generally located at the region which has the greatest pressure gradient.The analysis is in good concordance with the observed measurements for many years.Therefore,the stress pressure coupling mechanics model is proper for the research of casing deformation.
出处 《石油学报》 EI CAS CSCD 北大核心 2001年第3期75-80,共6页 Acta Petrolei Sinica
基金 大庆油田"九五"科技攻关项目 :"大庆油田典型区块套损研究"
关键词 油井 套管变形 地层压力 应力方向 应力测试 岩石力学 复合力学模型 微型压裂 casing deformation reservoir pressure stress orientation stress measurement rock mechanics coupling mechanics model microfracturing
  • 引文网络
  • 相关文献

参考文献6

二级参考文献3

  • 1刘建中,高强,刘玉琢,张雪.用云南下关测点的水压致裂结果分析地形起伏对应力测值的影响[J]地震研究,1988(06).
  • 2李自强,高阿甲,刘建中.试论大庆油田高压注水所起的作用[J]华北地震科学,1985(S1).
  • 3周衍柏.理论力学[M]江苏人民出版社,1964.

共引文献10

同被引文献151

引证文献22

二级引证文献150

相关主题

;
使用帮助 返回顶部