期刊文献+

Synthesis and characterization of Cr_2AlC with nanolaminated particles 被引量:2

Synthesis and characterization of Cr_2AlC with nanolaminated particles
原文传递
导出
摘要 In this work, we reported the large-scale and low cost synthesis of high purity Cr2 AlC powders with nanolaminated particles by pressureless sintering. The chemical reactions involved in synthesizing Cr2 AlC had been studied and discussed. The results showed that the Al contents in the starting materials and sintering temperatures had significant effects on the synthesis and purity of Cr2 AlC. The obtained high purity Cr2 AlC powders were stable up to at least 1400 °C. The Cr2 AlC powders consisted of nanolaminated particles, the size of which was tunable by adjusting sintering time. The present synthesized nanolaminated Cr2 AlC powders would be an excellent reinforcement material for metal matrix composites. In this work, we reported the large-scale and low cost synthesis of high purity Cr2AlC powders with nanolaminated particles by pressureless sintering. The chemical reactions involved in synthesizing Cr2AlC had been studied and discussed. The results showed that the Al contents in the starting materials and sintering temperatures had significant effects on the synthesis and purity of Cr2AlC. The obtained high purity Cr2AlC powders were stable up to at least 1400 ℃. The Cr2AlC powders consisted of nanolaminated particles, the size of which was tunable by adjusting sintering time. The present synthe- sized nanolaminated Cr2AlC powders would be an excel- lent reinforcement material for metal matrix composites.
出处 《Chinese Science Bulletin》 SCIE EI CAS 2014年第26期3266-3270,共5页
基金 supported by the National Science Foundation for Distinguished Young Scientists of China (51225205) the National Natural Science Foundation of China (61274005)
关键词 合成 颗粒 表征 无压烧结 化学反应 AL含量 烧结温度 起始原料 Nanoparticles Electroceramics Pressureless sintering X-ray techniques
  • 相关文献

参考文献20

  • 1Sun ZM (2011) Progress in research and development on MAX phases: a family of layered ternary compounds, lnt Mater Rev 56:143-166.
  • 2Sun ZM, Music D, Ahuja R et al (2004) Bonding and classifi- cation of nanolayered ternary carbides. Phys Rev B 70:092102.
  • 3Tian WB, Sun ZM, Du YL et al (2009) Mechanical properties of pulse discharge sintered CraAIC at 25-1000℃. Mater Lett 63:670-672.
  • 4Barsoum MW, Radovic M (2011) Elastic and mechanical prop- erties of the MAX phases. Annu Rev Mater Res 41:195-227.
  • 5Wang JY, Zhou YC (2009) Recent progress in theoretical pre- diction, preparation, and characterization of layered ternary transition-metal carbides. Annu Rev Mater Res 39:1-29.
  • 6Tian WB, Wang PL, Zhang GJ et aI (2007) Mechanical properties of Cr2A1C ceramics. J Am Ceram Soc 90:1663-1666.
  • 7Sun ZM, Li S, Ahuja R et al (2004) Calculated elastic properties of M2AIC (M=Ti, V, Cr, Nb and Ta). Solid State Commun 129:589-592.
  • 8Manoun B, Gulve RP, Barsoum MW et al (2006) Compression behavior of M2A1C (M=Ti, V, Cr, Nb, and Ta) phases to above 50 GPa. Phys Rev B 73:024110.
  • 9Sun ZM, Ahuja R, Schneider JM et al (2003) Structure and bulk modulus of M2A1C (M=Ti, V, and Cr). Appl Phys Lett 83:899-901.
  • 10Hettinger JD, Lofland SE, Barsoum MW et al (2005) Electrical transport, thermal transport, and elastic properties of M2AIC (M=Ti, Cr, Nb, and V). Phys Rev B 72:115120.

同被引文献9

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部